Viewing all customer Discussions for:

Door & Window

i THINK i have idendified channel balance but want to confirm (strength) option code details NON-TILT WINDOW CHANNEL BALANCE 1) 1/2 inch channel width 2) series 385 a) 19-005 top shoe b) 15-004 bottom shoe (1 - 3/32 inch ) 3) lengtht 27 inches = S385-27 4) stamp / option ??? GUESS i ... (cont.)

looking for a compatible replacement for a philips stayton window channel balance. the part measures 1/2" wide and 27" from top to end of shoe. the stamp on the part is 25 3 FW CMC 10. can you advise me of a part that would work as a replacement

I'm looking for a part. The crank for the window stopped working. The only part I could find a number for was the outside casing, which said "Andersen 7191-33." However, it is the inside part (operator?) that may be a problem. I attached pictures to hopefully reveal what the problem might be and ... (cont.)

stamp says CALDWELL 17 5 10 whole channel 19" just the steal channel is 18" long.

please let me know what shoe I need for my patriot window. Thanks

Need help to determine the right replacement. Thanks, Dave

I know what replacement channel balances I need as I have ordered before for another window. I need to replace my top sash guides on 4 windows now and three more later. Here are the measurements attached as well a picture of the old guide. It screws on to the window through the second hold down whic ... (cont.)

Hello: What are you recommending as a replacement for this part number? Note: I confirmed, and the 060-1255 has 3 15/16" spacing between the screws. Many Thanks, - Gil

I am looking for a steel roller to replace the corroded version pictured on the right. It was mounted /screwed directly to the screen door frame. The closest I have found is pictured on the left, though it appears the roller itself cannot be removed / unscrewed from the mount to which it is attache ... (cont.)

Hi, I'm pretty sure this is what I need. The channel section is 28". I believe the stamp is referring to a 2740. Please see attached photos to clarify. Then I can order a pair. Thanks for your time. David I like your website. Well done.

I was told by the dealer that it was an Acuweld double hung coil constant force counter balance. The coil snapped and I'm looking for a replacement. It has 7R printed on the body.

Our house was built in 1998 or 1999. We are second owners. Windows have no markings. Glazing is white in color. I looked on your website. Closest style I found was 55-080-6, but that model has an extra turn down and dimensions are off some. Please check for correct replacement part. ... (cont.)

Hi, do you happen to sell this part? There are no markings found on the hardware.

Hello. I am looking for a source for 30 of these rollers. Thanks very much. Joe

I'm not sure what kind of window balance im lookong for. Its 29inch length and 1/2 inch width and a mark that said 28C

I have attached a picture of the item...I can supply more pictures and dimension details. Is it possible to get a replacement and approximately how much would it cost. I need the sliding door handle with the type of locking mechanism shown.

Hi there

Lock strike screw holes 2-1/4" apart center to center. The screw holes on the slider window is 2" center to center. Hope this help find one!

Hi, I got rid of my old rollers, as I installed some vinyl tracking stuff. That solution did not work and now I'm stuck without my old rollers. Is there anyway to retro fit generic rollers to a door? bw

I have to replace the balance in my windows and the only numbers I can find on the part are 11600-17 (below the company name) and 103 S89 6/02 (stamped on the end flap). Windows were installed in 2002 as part of a new build. What part number would be a suitable replacement?