Viewing all customer Discussions for:

Door & Window

I'm interested in buying about 10 of these window crank mechanisms for my Park model mobile home I'm hearing that they're not made anymore would you by any chance be able to get about 10 of them for me the part number is on the crank . It could be either 887106 OR 887/06

Unobstructed glass size 42 1/2 x 88" tall early 80s installation. I'm assuming it has a single roller any input on what model part that would be.

The metal measurement is 26.5 the numbers stamped are 26 3 and looks like R.S.I.

Can you provide a cost for this balance? It appears to be a SerieS795-27D closed CAM 1.25" shoe with a 15-198 clip. I need qty 2 (1windows). Thank you

Hello this is wissem im looking for this part I couldn't find it on the website can you help me reconise this part please? thank you

Top and bottom pieces are both winged. Not sure which one is a correct match.

Hi, it's from a non tilting window. The metal Chanel is 1/2" wide and 33" long. thank you, Dave

Only marking I can see is "TRUTH"Problem appears to be the plastic slide (cracked, no longer attached to the arms)that accepts the two arms guiding the correct angle / opening of the Window.Slide rail on the bottom of the apparatus is 12" in length.Operator (inside) apperas to be in the middle of th ... (cont.)

Looking to replace the cam lock, need part number etc. Thank you!

Hi. The lower knob shaft rotation housing on my lock is broken. Is a replacement part available? If a replacement part is not available and I need to buy a whole new lock, how do I select a right hand unit?

I need the replacement locking mechanism because the locking lever has broken off. Looks like 41 1/8”Regards

I have Soft-Lite Barrington Double Hung Windows (2012) and today the top sash wouldn't go all the way up, we've been told it's the tension or balance system that needs to be replaced. I would like a quote on the parts needed to replace both sides of this system (if not sold in a set). Happy to prov ... (cont.)

Help Identifying Hardware.

Could you please confirm this part number 90-095 matches with the picture which i uploaded

Channel length is 26 1/2 inches a little bit over that I don't know how to measure The stamp code is 26 4 pd

Hi, We have a window with a Turth crank and locking mechanism. The lock operates by pushing and pulling a metal strap that runs up and vertical to the window locks that move two hooks to lock and unlock. We need a replacement metal strap and guide - what's that called and how do we get one? thank ... (cont.)

Hello! So I bought a 3 and 8 but the coil is too high to close the window all the way down. These seem to be 3 in long but fit otherwise

I need a lock mechanism to replace the broken one.

could you help me identify the balnace type I need for the window shown on the attached pictures.The balance shown on attached pictures has a with of 9/16"

Do you have this parts?