Viewing all customer Discussions for:

Door & Window

What part replaces the 2140 Q stamped in block & tackle? I've had a glass/window company make a repair to my window. It looks like the replacement that they used was much shorter. Does this matter and will this matter over time? They also brought the wrong part for the side clips. It ... (cont.)

Hi, I recently purchased a home that has Andersen windows, both casement and awning-style. There are separate storm panes and the previous owners have used these white plastic clips which are sold as screen clips.In many places they are broke or cracked.What would be the best metal (more solid) repl ... (cont.)

I need your help on this and I have attached three pictures of what I need. Sometimes it is hard matching these parts up using pictures alone. What I am looking for is 35 inches long and is a "ribbed" piece using a block and tackle operation. I measure the channel on the old piece and it is exact ... (cont.)

I have a channel balance that is missing. It is stamped "13 4 GN CALDWELL". It is 1/2" wide and 14" long per the great visual on your webpage. I believe the correct replacement part is S380-14 but I am confused on which option to select. My window weighs 16.6 pounds. Can you please advise and con ... (cont.)

I have Andersen 200 series double hung windows. They are wood and NOT tilt & Wash. The sash locks are breaking and Andersen has discontinued those locks. The receiver is mounted to wood which is beveled. The mounting holes are 1 7/8". Can you recommend a replacement in antique brass? I have tried va ... (cont.)

Hello, I need 4 wheels and 4 springs as pictured. Each of the 4 springs has their ends snapped off and the wheels have become stuck.

Please help me identify screen window corners for andersons attached are 2 pictures measured 3/8 inside and cost per unit thank you John R

Attached find a few pictures of the corners for my Pella screen inserts. The screens are 7/16' deep, and the part seems most likely to be the 95-181 part number on your web page. Any help you can provide would be appreciated.

i need to replace a coil spring. the part # marked on it is omega 5.5 33 and pat# 5232208... i believe its in your 160 series but the 33 is a coil length and i don't know what one to get. there is also 1.21/1.32 from the tip to the open notch. thank you for your help Ron

would a the length of the arm effect the window operation,like properly closing etc. We have the the crank operator with the long arm #39-175 , would the operator#39-097 work just as well, its less money.

The glazing needs to be replaced on The classic Mayfair doubled insulated windows. These windows were installed in 1988.

The photos are of a CertainTeed window swing latch. The approximate dimensions of the latch are 3.5" long x 13/16" wide x .75" thick. It has two prongs on the bottom to snap into the window. There is one mounting hole on it.

Hello, We bought an old house and have discovered that the majority of the exterior storm windows are held in with paint, hope and a plastic clip or two. The rest of the clips are long gone. We were going to repair it, but the clips are not held in by screws and we can't figure out what the "hold ... (cont.)

Peach tree patent no. 919213 one unit with overnight lock 4 and 5/16ths mounting holes

I need a new latch for my door. The spring broke.

How much for lock? How much for inside handle? How much for outside handle? If inside handle is replaced, will outside handle then rest in a horizontal position rather than rest vertically?

I recently purchased the 84-063 and 86-002 from your company in an attempt to fix a sliding screen door. Unfortunately they were no the right parts. Attached are photos of the 1 part I need. It is a plastic guide that keeps the door in its track. I would need 10 of these pieces. How would I ... (cont.)

I have the 82-069 patio door handle. I need a new mortise lock. Will the 82-218 fit? And will the lock activator from the -069 fit into the activator on the 82-218?

Need your help.. I am looking for this item and having no such luck finding it. It broke off from a patio sliding screen door upper side. I have search under upper guide, clip and retainer clip but no luck. Any help would be appreciated. Thanks in advanced.

I am looking for replacement parts for my sliding door. It appears that part number 82-005 will work for the inside, but I do not see any pictures for the outside part. I need the outside handle to be flush with the door as there is a screen door that closes over it. The US patent number is 3,596 ... (cont.)