Viewing all customer Discussions for:

Door & Window

Looking for replacement rollers for sliding glass door. Do not have photo of them installed. They have the #138 on them. The house was built in '81 I imagine they are that old. We had to take the bottom metal off the glass and slide them out the side to remove them after removing 2 screws on each s ... (cont.)

Which shoe is the correct replacement for attached dimensions? I suspect it is 15-047 but measurements are only close. Thanks in advance for your help

Hello, I am looking for screens door pulls and latch to replace the one from Milgard (16 years old screen). Would your #83-113 work well as replacement?

I am looking for Pella Window cranks for casement windows. The house was built in 1964 and I am missing the window crank that opens the window and the handle that locks the window. For the window crank handle there is a number inside: 1603-4 and for the lock handle: 1305-3. Also one of my windows ... (cont.)

Can you help me find a replacement part for this piece. I have pics of the broken one and one from the other side that is not broken. Unfortunately, we tried to order with sears and one attempt to match the pictures on swisco and can't find the right one. Thanks in a advance for your help. ... (cont.)

I have Anderson model 400 series casement windows with metal screens. I'd like to replace the metal screens but not with fiberglass screens. Will 59-250 foam splines work with aluminum screens? If not what spline do you recommend for this type of repair? Best Regards, J.

Greetings: I need to replace four Hope window cranks and arms (the teeth are stripped). The original part number is R. H. 5564. The screw holes are 4 1/8" apart. So far, so good, right -- because that would seem to match up with your 39-354. But there are two issues: First, the length of the ar ... (cont.)

I have channel balances with the code 28B USB. i see some similarity between my balances and a long Swisco discussion in Florida (Search 28B USB & 28C USB) My main problem is the bottom shoe, which is only 7/8" from front to back. I don't see any Swisco options less than 1".

PGT Aluminum Horizontal Slider Windows, could you please help us find this part? They hold the windows in place, windows are installed in a condo building. White nylon part. Dimensions 1/2 inch wide by 5/8 inch long. Josie R

Hello, Need to replace this item. dns industries 16 inside pull standard Thanks, if you can help me out. Leonard

need 2 sets for 2 windows that will not stay up

Looking for screen door rollers

Trying to find replacement bearings about half of them are worn out. From too heavy drawers I think. Several appear to have been previously replaced as there are at least two different styles. Thanks

I have multiple tube balances to replace and there are also a few broken pivot bars and shoes. I found the tube balances on your site (series 600); however, I cannot find the bars or shoes. I was not able to remove a shoe to measure it. If I locate the correct cam I will merely order some of ever ... (cont.)

3 1/2 inches long 7/8 inches wide Screws are 2 5/8 inches apart

Truth Folding Handle And Cover Kit Product Code: 39-107FK Will this fit a Truth 39-187

I need a replacement crank mechanism, not sure if thats what its called! I cant open snd close the window any more!

We had a screw break off when we were trying to make some minor repairs for a customer. I believe that the pt# is 1886 or 1888. I have attached 2 pictures for you. Can you please help us to identify a replacement? The homeowner doesn't mind if it is slightly different, as long as it is close and wor ... (cont.)

Is there a way to estimate the proper balance height based on the sash? Customer needs interior shutters removed for access and they do not want to do that until the work is ready to be done. Visible glass is 29H, the sash height is 34.25. Thanks

Hi I am trying to find a replacement pivot lock shoe for a window in my home but I do not know the brand of window and I cannot find a part or any marking on the pivot shoe. I've looked on your website but couldn't find any that match. Any help you can provide would be greatly appreciated. Thanks ... (cont.)