Viewing all customer Discussions for:

Door & Window

To whom it concern, I am looking for

Hello, Attached are the pictures of part on the closet door.I need a plastic and screw in. Thanks Ali

I ordered part 84-057, but the bolt sticks out too far and the wheel will not fit back into the housing (or whatever you call it that the wheels fit into at top of door to slide around). I need a 1" wheel that is 1/4" thick that has an inset screw or bolt that won't stick out. The first picture sh ... (cont.)

Hi, First of all, let me just say I love your company and site-the videos are super helpful and the process of locating your product is as easy as it gets! However, I'm needing a little help locating the type of beading my windows have on them. I wish I could give you some type of information r ... (cont.)

I need these tilt window latches they come from replacement windows that are 30 yrs old They are plastic. another company sent me them in metal they don't fit correctly and when you make up the back screw (clostest to center window lock it jams the spring) previously they sent me the same exact ... (cont.)

I need to replace screen door rollers. both. can you help ? see photo attached. Krishna

I have 2005 aluminum window master windows. I need a sash roller for my windows. It is a black plastic base with slotted double plastic wheels as you can see in the pic. Each roller is 1/4 in wide x 3/8 deep. If you don't have the part I could retro fit something if you had the right dimensions. ... (cont.)

All of the windows in my kitchen have broken hardware, and as a result, I cannot open any of them. They are all casement windows with crank hardware and plastic latches. In two cases, the crank operators are broken and in one case the locking latch is broken. I have contacted a few handymen to se ... (cont.)

I have storm windows (Macon brand) and screens that slide up and down by pulling inward on plastic devices which appear to be spring loaded. The plastic devices lock into slots on the window frame to prevent the window from dropping down. When you pull inward on the device, the plastic devices p ... (cont.)

Had some hail damage to window glazing strips. Trying to identify replacement glazing strips..old strip is 5/8" with small groove

Storm door hinge Sorry did not get measures will do to note

This broken lock is from existing Bay Window. Manufacturer is unknown as window was already installed when house was purchased.

Hello, I am restoring an Eichler home and am hoping to find parts to fabricate several missing closet doors. The pictures are of the roller, which I see is still available, and a view of the channel that makes up the frame of the door. My question is regarding the frame. I have run out of luc ... (cont.)

whats the best way to cut the slot for these in a new piece of screen sash

See attached photo of Roto Keeper G2-*43. We need several. The photo shows our attempt to file down the left side to adjust the tension of the lock...which was "hanging up" and preventing the window from shutting completely. Note that the ruler in photo is NOT centered within the screw holes. Tha ... (cont.)

Boreal tilt lock for tilt out vinyl window and a snap in channel that covers the spiral balance. Cant find them on your site ;^)

Sorry I don't have any other pictures of this one. It was sent to me from a job site. Could you possibly identify it or something close? Thank you! -Suzanne

Please help me to find this parts for the storm door I need 2 One with the bottom one of the top of the name was stamp is LONESE

The pictures are of the door lock area. The AAMA mfr is ELL-1. Says series is 311/312 VSGD Can you help..? I hope? Our door is white.

The screen is held in place by 6 plastic nail like pieces that you push in when the screen is in the track. My windows are 10 years old and everytime I wash them more and more of these fasteners break off. Do you sell them? THANK YOU TONY