Viewing all customer Discussions for:

Door & Window

I have a Latao/ Pado door with a Brass door handle assm. All my door knobs in my house has been changed to Polished Nickel. Can I get the assm in that color? If not, can it be painted to that color? I hate to replace the complete door because I can`t get a polished nickel door handle/lock assm. Ron ... (cont.)

am looking for the plastic door latch for an Arcadia Sliding Door 700 series

I have a Anderson casement window missing stops I found a stop for a at swisco that looks and measures almost to an exact replacement except the top of old stop lays flat on glass and the top of new stop has a little return to it.my question is did Anderson make a change o this stop or has time flat ... (cont.)

I have a Pella Sliding glass door and need the "catch" part that that mounts on the frame to lock into. My door numbers are P21 IG-3 Sept 23 2005 697998 01 17. When the door was installed we had a doggie doors that mounted on the side so the installer never install all of the parts. ... (cont.)

Do you have a replacement for this? I need the LH one. Thanks. John

I have an Owens Corning double hung window from 1998. I need the two little levers that you pull back to let the window fold down for cleaning. The 2 plastic tips broke. These are the pieces to the right and left of the lock. Would you have these available?

I called your location and talked to Jodi I have two different lengths to order one is 14 in long stamped 1340 and I have one 28 7/16 in long stamped 2830 she said that doesn't sound right it should only be 28 in long but it is really 28 7/16 in long metal end to metal end the 14in is really 14 in l ... (cont.)

I am looking for a replacement operator for a Del Mar operator arm #21550. I spoke with "Jody" in customer service who sent me a Truth Dyad operator #39-316. It is the same type of operator that I need except the difference is in that the original part has a 4 inch arm that attaches to the window an ... (cont.)

The pivot shoe in the picture cracked underneath. So I need a replacement. Hope hoot is clear to indentify item.

Have a 1/2 inch 21 inch balance the stamp on side reads Japan 122 . What potion do I use?

I have a certainteed vinyl replacement window that needs a balance the coil spring # SA3610. The window is dbl hung 47.5 x 47.5

Window Latch on the Anderson SivlerLine Double Hung Window. NOTE: 1) One of my photos shows the Latch and the Receiver. I need the Latch (larger part with the rotating Lever) not the latch receiver (thin part). The following numbers/letters are imprinted on the bottom inside of the latch: 1) ... (cont.)

My question is, when a portion of the pivot bar is broken in the window track how do I extract it? it wont slide out! or do I just push in what is there with the new Bar?

storm door handle //brass //purchased Mid South supplies beltsville md Storm door Manufacturer: Metal industries Inc of CA.. 4314 rt 209 east//elizabethville PA 17023 no longer in business // the 4200 series Advantage Storm/Screen Door with the 4200 advantage series hardware with heav ... (cont.)

Yes this glazing has the same dimensions as mine. One more question: my glazing has slots cut in to it so it fits better around corners. Does this glazing have that?

I need some help finding these balances please. It is a 1/2 inch wide balance. I have 3 different lengths I need. aluminum stamp on track is 1820, 2420 and 1220.I need 6 of the 24", 20 of the 18" and 2 of the 12".The pictures are of the bottom part and the plastic part should have 2 "wings" on it bu ... (cont.)

I have a casement window crank that works well cranking the window out (counter-clockwise). But when I try to close the window, turning it clockwise, it just turns freely and the spindle (worm gear) just screws right out of the casing. I believe it is missing a retainer clip that should keep it tigh ... (cont.)

question: I am trying to replace a spiral balancer from my window frame. I watched your video about removing the screws from the bottom of the window to attach and replace the balancer. The only problem I cannot find any screws to remove from the window lower casing. I am looking at series 500 for ... (cont.)

I purchased your 82-035, but the beige color was too light. I am attaching photos of my existing handle for your suggestions. US Patent 5125703 D340,398

Hi, I have a 3 year old Atrium screen door, and my dog ran through it breaking off the side of the bottom rollers. I've been to Lowes and Home Depot for replacements, but they are too wide. i.e., they look like your part 84-091, which is .375 wide, and mine are about .315 wide. The other difference ... (cont.)