Viewing all customer Discussions for:

Door & Window

Greetings!! I came across your website via someone else who had a video on window repairs. I am looking to repair/replace my non-tilt window balance springs on four windows. They are all the same size and I have removed the balance springs and they all match. The spinrgs go in an half inch (1/2 ... (cont.)

Need replacement lock mech.

I have a sliding door that is 1 1/8" thick. I am looking to upgrade the handle lock assembly with something that at least feels more secure. I currently have an 82-002 with a handle set. Is it possible to replace a current 82-002 with a Mortise type lock assy?

No Identifying marks other than US Patent #5,353,548 I have several rentals that have these windows that need the balances replaced. I would like to have a few of these overnighted to me, then have a source to get them from when needed

My window is not working and I am looking for a balancer. It is made by Milgard Windows and the number is 29 9 DW CMC 10. Thanks.

how do you know which clip to us the 19-029 or 19-030????

Ashley furniture .plastic piece to hold glass in place. Looking for replacement pieces .

I have attached to this email pictures showing the type of Awning Window and some working parts. Please advise me if you stock the different parts to operate this type of Awning Window. I will need replacement parts for about 30 units of this type of Awning Window. I look forward to hearing f ... (cont.)

part #55-182

I have part # 39-375 on a new window. Can I replace it with part # 39-376 fairly easily? The window is a PlyGem window. Thanks.

Good day, I have included a picture for each sides. It is possible the end pieces have been broken off. The inner spring hook end has broken off. The metal portion measures 33" (metal to metal). I have a 32C stamped on the metal body. Thanks for your help, Yves

Hi, we have windows from Waterville Windows that was in Waterville, Maine before going bankrupt. We have a few windows with balances that have broken and are looking for a source for new ones. The number on it is 27-3 EA3 CMC1. Does this mean anything to you? Any help is greatly appreciate. ... (cont.)

Need help identifying the patio door handle. The holes look like they are about 4 inches apart top to bottom. The door is 1.5 inches thick. The opening for the internal lock is about 3/8 inch. All this door had on it is the keep which is also pictured. I need the door handle set and the internal ... (cont.)

Hello, I need to replace many of these plastic track holders. They are 2 piece and measure 3 3/8" long, 15/16" wide, approx. 1/4" thick and the mounting holes are 3" apart. Hope you can help. Thank you, Larry

Can you please help me identify the parts I need to for my NAPCO Vinyl replacement window? The lower window itself is 28.25" wide and 19" High. I have included pictures of the parts next to a measuring tape to help identify their dimensions. Thank you for your help, MaryAnne

Need help identifying which channel balance replacement setup I need. I've attached a few pics of one I removed that has a broken hook. The hook appears to attach to the channel with a rivet, so I assume I need to replace the entire assembly, correct? Length = 28" Width = 1/2" Sash Weight = 1 ... (cont.)

Hello, Im looking for replacement wheels for what I believe to be a A Therm door. part is 5/8" thick with a 1 1/4" Wheel. thank you, Lou

I need Andersen Sash Balances. The stamp I see looks like it says 10#27. Would that be a 1027? It also says 11600-17

I have in the past ordered a pair of S770 series balance 32" long and the replacement part worked fine. I have a couple more windows that are difficult to lift and close, I am sure the balance needs replacing also. The problem with original balance is the plastic side by side groove pulley splits th ... (cont.)

I need window handle crank Truth 45251 in Clay