Viewing all customer Discussions for:

Door & Window

I need some help. I have single hung windows with a double coil balance. Half of the balances on my windows are broken. Basically the plastic cover over the coil breaks, then the entire unit no longer works. However, I noticed that the coil is located above the window unit when it is closed ... (cont.)

My casement windows, 2 of them, need the inner teeth part replaced as they are stripped. I tried moving different handles from other windows but they just don't work. Is there an easy fix for this? I bought a whole houseful of windows in 2003 from an Andersen distributor. I feel if I can somehow ... (cont.)

I'm pretty sure my windows need the 26-390 tilt latch. I'm unsure of what shoe is needed and/or if I need any other parts to fix it.

Do you have rollers for IWC patio screen door? The latch on the screen door matches Swisco 83-034

Attached are pictures of a Pivot Bar and a Tilt Latch that I am looking for. Do you carry these? Thank you, Keith

I need several pivot bars replacements for my crystal windows. I've attached the pictures... the bar measures 2 1/2 inches long

I have a sliding glass screen door that has 3.5 center holes I'm looking to replace the entire assembly both interior and exterior with something that has a lock and opens from the outside with a key. Can you please advise me what to get? I did look at the Keyed Exterior Sliding Door Pull Product Co ... (cont.)

Is this a 15-002 or 15-001 bottom Shoe? Thanks, Carter

Need to replace Wright operator. Gear arm is 4/38 inches on center Link arm is 3.5 inches on center. I looked through your site but,could not find a replacement.Do you have any suggestions? Thank You

Hi, I have a slider labeled 32 5. I believe it

I am looking for new replacement sctreen door handles - see image of the existing handles. One is broken where the fem. threaded shaft attaches to the base. They have a 1.75 in. screw spacing with two screws. The existing doors and hardware were installed in 1988. I would like the same ones if pos ... (cont.)

Need a screen door latch and pull replacement. I measure the distance from hole to hole as 2 1/4". The distance from the holes to the edge of the door is 1 3/8". there are no identifying labels on the door itself so unsure of brand. I have attached pictures. We are currently using a piece of v ... (cont.)

Hi - The handle for my ~25 year old sliding glass door broke, and I need advice on which Swissco set to replace it with? The lock itself still works, only the handle is busted. I believe the locking mechanism is called a Mortise-style hook lock. The distance between the screwholes in the han ... (cont.)

I'm trying to find pivot shoes for my patriot 2000 (ryan homes) vinyl single hung windows. Your 15 129 has the right dimensions, but I'm trying to tell if the upper cast metal guide for the spiral has socket to accept a retaining screw. From the pictures on your website other similar sized model hav ... (cont.)

The homeowner wants to paint the windows brown. Do you have locks, handles and covers in bronze? See attached photo. Thanks.

window # 1 32 9 EV CMC 2 window # 2 26 5 EU CMC 2

I need some help in ordering two spiral balances. The tip color on my balance is yellow but I did not see that as a choose. I have attached a picture for your reference. I cut the plastic away to expose the tip. The length is 28" and the diameter is 3/8". There is a stamped number on the tip "0 ... (cont.)

I would like to order balance boxes for two Andersen double hung windows and would like to know the correlating part numbers. The numbers are: 1) J85 5#23 4-83 2) D31 8#31 3-85 Thank you.

Is there a stainless version of the 81-156? I need to replace the rollers on a patio door that is located on the oceanfront.

Hi do you have replacements for these rollers? I can't see a screw anywhere to take them out. you can pull on them and they are attached to a flat piece of metal strip but I can't see a screw there either. they almost look welded to the strip because there's a bump of metal to connect it to ... (cont.)