Viewing all customer Discussions for:

Door & Window

Does this sash latch come in bronze color? Thanks, Randy

I have a Broyhill entertainment system and the plastic hardware has become brittle and is breaking. I am interested in buying replacements. I have attached picture to verify if you self the items. The magnet is 1" 7/8 side to side. thank you Brent

Please ID a replacement set of rollers for my patio door. The house was built in 1971 and I believe the door is original. The roller frame has stamped in the side " Product of Del Mar Eng Co. Long Beach, CA. Pat Pend" This stamping can be seen in the photos attached. The rollers are metal, but seem ... (cont.)

Hi, I've got 2 broken rollers on an unmarked mirrored wardrobe. Two part photos are attached. I've tried all over the internet to find this part. It seems a bit longer than most of the other stuff out there. Thanks, Dave

28" in length from tip to tip 1/2" width Markings: 26 4 FT CMC 4

I just purchased a 28 year old condo with Alum. frame double hung windows that have a hinges on the left side for cleaning, instead of the typical tilt out. Several of the hinges are broken and several of the channel balances and missing or broken. Also some the slides that prevent the window from o ... (cont.)

29" long 1/2 " wide 2830 RSI or BSI - I think

need to find replacement lock for window. This one has quit locking. It is right next to our door so lock is important.

Its 11/16 wide the gold part of the body is 3 inches long , and the wheels are 1 1/4 diameter . Its about 2 and half inches from the end to where the pivot point is for the wheels on the gold part There is a self tapping screw that holds this to the sash Thank you Jeff

I have a 2830 with what I think is a 15-001 shoe. (1 inch x 1 and 1/8 inch) Not so sure about the top piece number. What series balance do I need? Many thanks, Kevin

Hi, I would like to buy a pair of balancers for a 36x48 Milgard single hung sash window (operable section 29 3/8" x 19 1/8" viewable). Stamped ID # is: "19 5 BSI TL". Length of the metal section is 19 3/8", 9/16" wide (1/2"), 5/8" depth. Lower guide pads are 15/16" wide, depth of guide is 1 ... (cont.)

I need to window weep hole covers. I'm not sure if I need to buy one part or if it comes in two parts? The flap part was crooked.

I was finally able to pull the door and take out the current rollers and get some pictures. The picture of the 81-141 roller that I previously ordered and returned is also attached. Mine are the Truth 30410 rollers. You'll notice that the tabs used to mount/screw the rollers into the bottom of th ... (cont.)

Sorry, no markings. Door has a glass operable side and a fixed pane in same unit. Probably about 20 years old, maybe Brosco millwork (the door). Weatherstripping runs on both sides and top of door frame. It fits into a dado in the door frame, as shown in my crude drawing. The "cushion" or bulb m ... (cont.)

In Sept 1998 I bought an Andersen Sliding Glass Door model FWG100068-4. The thumb lock is loose - can that be tightened or do I need to replace the thumblock and/or the entire latch assembly? Pictures attached. I think it is a Newbury style thumb lock but not sure? Any help is appreciated Stev ... (cont.)

Hi, This is a part from a vinyl replacement window. I did not see any that looked like it on your site. A small part of it is broken off on the end. I am enclosing pictures of both sides and a side view. The part is a little better than 2 inches long as it is. I found parts for another window f ... (cont.)

Good Morning, We do not have a brand name or part number but we need replacement latches for some aluminum storm windows. Pictures attached. We sure could use these asap if at all possible. Thanks! The measurements are: Length 4 1/16 Width 7/8 Depth 5/16 at its thickest and 1/4 inch at ... (cont.)

I have 4 sliding closet doors that have broken wheels. Need to find exact replacement.

Need to find suitable replacement for sliding window nylon dbl roller. Dimensions: 1/2" x 1 3/4"

Looking for a replacement part or the entire window balance for an Alenco white aluminum sash (bottom part moves up and down, no tilting feature) window. I'll attach some pictures of the plastic end pieces and provide some measurements. The metal channel is 28" long. The stamp on the channel says ... (cont.)