Discussions for Door & Window : SWISCO.com

The operator I ordered has a different gear arm!

30866 is stamped on the end of the arm, which matched the part I ordered from you. The middle section of the old, broken arm is stamped with 40395. The part I ordered from you doesn't have a number stamped on this middle section and is about an inch shorter than the middle section of the old, broken ... (cont.)

Replacement for tilt vinyl windows

I need to replace the spiral balances, pivot lock shoes, rectangular window tabs (I don't know the actual part name and function) on five top tilt windows and one window latch. The window brand is unknown. The spiral balance appears to be standard and 15 inches in length. I'm having trouble dete ... (cont.)

Trying to identify window sweep latch

The hole to hole is 1-1/2 inches and the swoop is approx 5/8 inch. Thanks

Peachtree screen door roller track

I have a 6' Peachtree screen door with metal rollers. I have found your replacement product for the rollers (84-075), but I have not found a replacement for the top track. It measures 7/16" X 1/2". I have seen your track covers (80-102), but no tracks in this configuration. Any assistance would ... (cont.)

sliding door wheel

I need a sliding door wheel for a door that is almost 18 years old. It says Del Mar Toronto on it and that's the only marking on it. The door is back on it's track so I can't show you what it looks like installed. I can do that if required later. I looked at your parts but there are so many that loo ... (cont.)

Top Sash Guide for 25-year old Eagle windows

I went to your website and was able to locate a virtual dead ringer with Product Code #18-069. The only slight difference is the small tab hanging down on the outer edge. On my piece, the tab is 1/4 wide. Looking at the tab from the end, there is a U-shaped cutout area behind it...in other words, th ... (cont.)

plastic tabs that clip the screen to the window frame

Several of the clear plastic tabs (each has a hole with a tiny screw in it so that it can be attached to the bottom of the screen) on our Patriot window screens have broken. These plastic tabs clamp the screen to the window to hold it in. How can I obtain replacements? Our home is a Ryan home ... (cont.)

Replacement Casement Window Latch

Looking to replace both LH and RH latches with broken handles. Unknown window manufacturer, home was built in 1962. First three pics are original (4 mounting screws). Last pic shows replacement latches (2 mounting screws) purchased a while back. Base dimensions are 3" x 2-9/16" x 1". ... (cont.)

help with channel balance length measurement

looking at photos ,,, i feel that the "385" series is the best match for my nontilt window....but the markings on the stamp (29 5 HV CMC 2) I assumed the "29" meant,length is "29" inches ....but when i measured the metal frame I got "30 inches"....included are some photos .....hopefully they'll help ... (cont.)

Window limited opening hardware?

Hi, Can you tell me what the name of the item is that limits over/under sliding windows from opening too far? They are about 1.5" high, and have a small pop-out tab that, when released, prevents the windows from opening more than about 4". There is one of each side of the rear window. Do you s ... (cont.)

Hurd casement operators

I need several operators for Hurd windows installed in a house built in 1988. The windows are wood inside and out, casement type. I would like about six left and six right operators, depending on price. Details should be seen in the photos. Length from the tip of the arm to the center of the gea ... (cont.)

window latches

DH-R30 window latches.

Anderson window balancer (windows are from 1977)

removed balancer and obtained stamped part number on unit: E40 9P27 177

replacement operators for Marvin casement windows

Hello -- I need to replace the operator for 3 Marvin casement windows. In all 3 cases the handle has come off and won't engage with the mechanism, and in one case the cartridge (?) has come out as well. One of the windows is open and won't close. All 3 are horizontally-opening windows, i.e., they ro ... (cont.)

windows grid clip

Would you have a window grid clip to replace the one shown in the attached picture? Thanks, David

snap-on plunger pin

pins with a spring included, used to hold screen window

Caradco window pulls;bronze;3 1/4" centers

I need 8 of these Caradco window pulls

Replacement window handle

I'm looking for a replacement window handle to match the one in the images. The back says "8160" and there is also a "3" near the handle. The diameter of the crank is 5/16. Thanks for your help.

Milgard window part ID

milgard window roller or pivot not sure what it is called hope you can help thanks Mark

Patriot Window latch

I need to purchase some of the Patriot window latches. Not sure if these are neutral of if I have to get a left and right. I have attached a picture of it.

Viewing all customer Discussions for: Door & Window

Viewing all customer Discussions for:
Door & Window