Viewing all customer Discussions for:

Door & Window

The interior gear parts are stripped. Help me find the right part please!

I need channel balances to replace those on hurricane rated windows which have become increasingly difficult to raise or lower. The existing balances are 36" long and 1/2 inch wide with what appears to be a 15-004 shoe and 19-005 top. It has 2590 stamped on the rail. I did not see any channel balanc ... (cont.)

Hope you can help me and the pictures come out,the pictures show 2 sizes 1.25" and 1.0" bottoms,the top is the same size on both,the number on the case is 4240 and are 43" long. I don't know why there are 2 sizes(maybe left and right)and need about 44 of them.And I don't know if I need any special t ... (cont.)

I am looking for Traco double hung window lift handles which are a white plastic with a hole spacing of 3 5/16 in. The window number is TGCC CBA D89. I need 4 handles.

My house is equipped with Weather Shield® vinyl windows, circa 1997. To the best of my knowledge, these windows use the Series 350 counterbalance. I am in need of the counterbalance spring retaining clip (see attached image), which fits into the window frame, that enables removal and insertion of t ... (cont.)

Hi, I am in the process of restoring and old cottage. I've been repairing some of the window mechanism but some have been lost.Rods come into the gear box on each side with a center crank that opens and closes the window.Have you seen such a thing? I haven't found any markings on the window to iden ... (cont.)

Hi Our slider latch somehow got jammed and now will not lock. Do I need to replace the entire handle or can I just replace the insides? I have attached a couple of pictures. The knob that we turn does feel a little jiggly

I have non tilt single pane windows in my house. Most of the channel balances for the windows are broken and I am having issues removing the balances. I have watched the video directions posted on your website and when I try to replicate them, the balance does not catch on the clips in the windows. ... (cont.)

I have jordon non tilt windows. I have I believe 28 inch s 351 balance rods I want to make sure about the option when ordering them I think it is 2730 on the bottom of the steel it is stamped 27 3 what does this option mean and do you think I am correct in choosing the 2730 thanks al ... (cont.)

I wanted to check one more dimension of my Pivot Slide Assembly (stamped 31878) before ordering. The dimension which matches the width of the track is 1.2 cm or 0.5 inches as shown in the attached photo. The other dimensions are 1 1/4" x 1 1/16" and 3/8" for the knob as shown in your photo for Pro ... (cont.)

I recently purchase a midcentury modern home with 4 large floor to ceiling jalousie windows and I need help to find instructions to replace operators and perform general cleaning and rehab. 2 of the windows work, but need new weather stripping, one has a broken operator and the other will not open a ... (cont.)

Need replacement window sash balances to match the following specs: Please direct me to the part number to order. Thanks, John Beukers Length - 19" Track width 1/2" Depth 9/16" Top and bottom plastic inserts:winged (see images) Identification: 29 4 HW CMC 7 Weight of window 18 lbs ... (cont.)

Looks like you have a lock set (82-227) that fits my measurement but the lock hook faces up and mine faces down.From the outside, the door opens to the right. There are no manufactures identification anywhere on the door or jamb. Thanks, Joe Harwinton Home Improvement

Please help me identify/obtain a casement window crank assy. These windows were installed in 1959 & configured with horizontal panes. The window opens from the bottom of the pane & moves outward as the crank is turned. Please reference the 3 photos attached. Your help is appreciated. Thanks, Jim S. ... (cont.)

Your 55-184 looks like the clip we're trying to replace but the dwg does not give the inside width (which would seem to be the most important dim). Our grill is 5/8" wide. Looks like the inside width of the 55-184 is too wide?

I need: (2) balances (2) tilt sash slide releases (2) pivot guides see attached photos

this is what I am looking for

90-193 window lock does it come with hung that locks the window in place

I have four casement window operators that have Truth stamped on the hinge hardware but I can't see anything on the operator itself. I would like to replace them with similar units in white is they're still available. Any idea from these photo's as to what the model is that I need to order? I am hap ... (cont.)

hello, attached are some pictures of a part that came off my sliding glass door rails. I think they are dust covers. please identify. distance between plastic bolts is 1 14/16" thanks, Gordon (sorry about blurry picture)