Viewing all customer Discussions for:

Door & Window

please advise if you have the full part with all the parts

Need to know what replacement rollers I need for the my sliding glass door, photos provided. Provided photo of the label on the door frame. It's the only written info on the door, not sure that is helpful. e door frame. Not sure that is helpful.

Do you have a match?

Customer ServiceI need to replace 2 of the plastic crank body covers for Anderson windows, as in the attached image. I have included an image of the underside with the number 7191-33.If possible, please identify the part number in your stock.Regards,Nick

20 7/8 Channel Length Channel dimensions are 9/16 wide x 5/8 Tall Stamped # 2030 Don't know the manufacture Qty 6 If you cant provide these what other balance will work that you offer? Lead time?

I am looking to replace the broken coils. have the 10j stamped on my coil. Certainteed is on the pivot shoe. I noted in the Q&A section the following "you will need to use an S170-405 and S171-405 on each side to replace the originals since we do not carry 10-pound strength". If that is your rec ... (cont.)

?

trying to locate a replacement pivot pin or cam ot whatever name they are called. These are for wood clad double hung windows. These are what attach the sash to the balance shoe. Cannot locate in manufacturer info anywhere on the windows.

Looks like your Roto Vinyl Awning Window Operator is what I need. Mine is center mounted on bottom of the frame, about 5" wide. Please discuss with me before I order. I can send a picture for verification.

Trying to replace my sliding glass door rollers. It is a complete track with rollers that go on the bottom of the door. Help please!

I was looking at Keller Window Lock 1 1/2" (90-031) and Pan Am Window Lock 1 1/2" (90-021) Not sure if one or the other would fit.

We've had probably 8 of our windows slam shut due to the balance releasing. In doing my own research, I stumbled across these as they may be replacable. But I'd like to confirm the PN before replacing all of the shoes.

it says 7.5, please verify

Can't find part on site

Bow window.

This window has no markings on it I can find. It's 72" tall x 34" wide. The track is 34" long that the spring / block and tackle goes in . 5/8 " wide

My home was built in the mid-90s and a few of the coil spring balances in our single hung windows have snapped. I am told that a company called Quality Windows produced the windows and they were then distributed from Mid-Am Building Supply, which is a local company here in Moberly, MO. I don't have ... (cont.)

I have a customer looking for 2 of these bumpers for an old Ador sliding patio door (Circa 1956) It is 1.5” long and 1” diameter at the base. Thks Patty

.

Two single wheels for bottom. Thx