Viewing all customer Discussions for:

Door & Window

The current spline for my screen door is 3/8". However, I want to replace the exsisting screen with PET RESISTANT SCREEN. so I assume a I need a smaller size spline, can you make a recommendation ?

We need to replace some Alcoa window balances that measure 29" long, with a blue tip. The question we have is in measuring the diameter of the balance. Currently, these have a plastic covering connected to them. Without the covering, the balance measures 7/16. With the covering, it measures 9/16 ... (cont.)

Thank you for posting. Our 38-090 does appear to be very close. I cannot confirm if it is what you have, however. You will have to compare the dimensions of the two parts and determine if they are the same.

I have 2 old arched casement wood windows that are an odd size and no manufacturer will copy. I think I could use an awning scissor-type mechanism and crank to pull them in tight without having to open the screen to pull them in manually from the middle instead of from the bottom. Do you think this ... (cont.)

I need a new handle assembly for a Phillips vinyl sliding door. The door is 1 5/8" thick and the dimension between the screws is 5". Do you have something that will work? Thanks!

I need to replace the crank-outs on 24 of the Anderson Windows at my church. ( 39-095 Anderson Straight Arm Operator. I have the parts. Can you send me instructions on how to do it? I am very handy and can figure just about anything out. Please? Thanks, Dave R.

I need a balance for an andrersen window 11600-17, stamp number N06419987. Thank you

Hi, I own a condo that was built in 2006. I need to replace the window balancer and need your help in identifing the exact type of what we have, so i can buy a new one that will fit the window. I measured the length of the balancer and it's 33". i am attaching photos to best show what we need. ... (cont.)

I need to replace my sliding glass door rollers. The only numbers on the part I have is 4639970. I looked it up, it seems to be a patent number. Any help?

I Have 20 15-047 terminal shoes ,they fit ok but the locking shoe cam are too short The cams are 1/2 inch and i need 3/4 inch.Thang You

This is the only # I can find on the Channel Balance (27 - 4) I believe I need 28" Series 351 Channel Balance with Stamp Option 2740 See attached pics. Thanks, appreciate assist.

I have 7 heavy windows that have channel balances 2730 replacement from SWISCO S390-28. After 12 years with these several have broken and those that are not broken it is almost impossible to open the windows because they do not move easily. Even when they were new it seemed that the windows difficul ... (cont.)

the numbers i have c98 6#23 384 11600-17

Hi, I need to replace an Andersen double-hung window balance. The lower sash visible glass dimensions are 36 1/2" wide by 16" high. There are numbers on the balance box but are very poorly stamped. I seem to be able to make out a 7?27 followed by 11-86. The "?" is the one character I can't read but ... (cont.)

old anderson window product number is E239P27775

I needed to replace a few broken latches on windows I had installed 17 years ago. The SWISCO website was very helpful in matching the parts needed. The cost and shipping was very reasonable. This was a very small purchase but on another company's website, the cost would have been three times as mu ... (cont.)

I am looking to replace a folding handle (which came with the vinyl Jeld Wen window) with T handle 39-102. Can you please give me dimensions on this T handle?

I beleive I need a 350 26 inch balance spring for a single hung Wenco window sash. I am stuck because there are 5 radio buttons on the bottom of the page and I dont know which one to select. I cannot seem to find anything on your webesite relating to the numbers. Option: 2510 2520 25 ... (cont.)

hi, I am trying to find replacement tandem roolers for my ruten klien wood slider. It orginally came with truth 30410 roolers thanks john Patent Number: 4.194.266

I have old plastic/nylon pivot shoes that have a brake effect that holds position when widow is tilted open. Pivot brake shoes fit in 1" x 9/16" deep window space below counter balances (which also need replacement size 21"). Existing shoes have a slot so when tilted open the window can be easily ... (cont.)