Viewing all customer Discussions for:

Door & Window

I need two right and two left casement window operators. They are white. A picture is attached. I see two different model numbers on your site that could be the right one. How do we differentiate?

Hello I have tilt windows, they seem to have standard hardware, I ordered most of my replacement parts already. But I cannot find a match anywhere for these pivots. I can't find any part#s or windows brand names on my windows to help. See my pictures. Thanks John

The rectangular hole in the door is about 1/2" wide by 7 1/4" and the old lock is broken. The handle slid up-sown to lock. I need a replacement handle and lock. The existing handle is like 82-020. Your suggestions please! The problem has been in getting a handle that covers up the large hole in t ... (cont.)

I have to replace the entire crank operator assembly on two lower lever andersen casement windows. I would like to replace the covers also. the only parts numbers I can see on what's left of the damaged mechanisism is 7168-18 & 7168-16. Part number 7168-16 also has a 2 stamped on it. The Andersem ... (cont.)

My windows are about 16-17 years old. The crank handle looks like the one you show, but the measurement that you depict as being 1 1/2" is about 3" on mine. I need a new handle for one of the windows. thanks you!! GF

I am trying to find replacement window pulls and sweep lock and keepers. Pulls are 3 7/8" wide x 11/16" high with holes 1/4" on center from the ends. Marking on the underside is 4 triangles inside of a triangle and the number 4. Keepers are 2 3/4" wide at top and slightly tapered to 2 11/ ... (cont.)

We need left & right side replacement latch's for our Traco window. Can you help?

Do you have the attached roller type? Pls see attached pictures. Cary

Looking for 10 or 20 (or more perhaps) old window handles for a School. See image. Thanks, Bill

Here are photos, do you have any idea what this balance is? Thanks!

Hi, I have Alcan windows that are about 22 years old. Between the glass and the aluminum frame is a vinyl strip that has become brittle due to sun and heat exposure. I have attached a picture. Can you help with the replacement part and some basic instructions. I've attached some pictures. Thank ... (cont.)

I have some Marvin Tilt Pacs around the house whose channel balances have failed. The balances look like your Series 751. However, the stamp for a 33" long, 9/16" wide balance says 32XHD, rather than 32HD as listed on your Series 751 ordering page. Does this mean these are a special orde ... (cont.)

I have a Ryland Home built in 1995 with Rollyson 8200 vinyl windows with a fixed upper sash and a tilt in lower sash for easy cleaning. The Rollyson company from South Point, Ohio 456680 is out of business. These windows have been very hard to open from day one seventeen year ago. I wond ... (cont.)

I'd like to identify the proper replacement parts for my non-tilt aluminum window built by Florida Extruders in 2003. Enclosed are pix of the proper parts. I'm assuming the spring comes installed in the unit. I've enclosed a few pix...I figure the part number would be S380-29 for the balance, and 18 ... (cont.)

Hi, I hope you can help me. I'm trying to find some sliding screen door rollers for old sliding doors. Attached are pictures with dimensions. I think they date back to the late 70s or early 80s. I found the name "hiLite" on the sliding door handle. If you don't have this particular part, do ... (cont.)

Two double hang windows need replacement parts pictured. The springs themselves are fine; the hooks on the latches are missing or broken. Sorry that I can't find a manufacturer name anywhere. I am hoping you may have this or something similar.

I have 3 Anderson double thg that measure 40" x 54" that I need new balances for the numbers on the are 11600r2 and BU6810311095 it measures 3" x 61/4" x 3/4"

i have older single pane, double hung sash windows. the dimensions are 32 5/16 X 27 3/4" inside. the sash balances have D 6 31 then -126 in a smaller font size stamped. my balances do not have the tab with the two screw holes. instead, the screw holes are about in the middle of the balance box. ... (cont.)

This is the part that protrudes from the window pane and connects it to the hanging hardware. The "rusty" section was screwed into the window and the non-rusty section was connected to the spring in the window frame. The previous owners of the house tell me the windows were Ventaire 500 series ... (cont.)

Hi, I have a number of channel balances that need to be replaced. I have taken a few out and the only thing stamped on them is "2800." They are definatey the 770 series although I don't see any 28B,C,D etc. Would this mean I have to weigh the sash? P.S. Im replacing all of these because the spring r ... (cont.)