Viewing all customer Discussions for:

Door & Window

I ordered a part (#38-089) by your measurements on the website. 5" between screws and the one arm 5". But when received It does not look like my old one. (see picture) The old one is longer to the left and and shorter to the right. (See picture) A plate attaches to the arm also in the pi ... (cont.)

Will this Coil Housing Pivot work with Pivot Bar 26-068? This bar seems to be what I have. (5/16" x 3/16" end) I beleive I have the Series 180, but on mine where the Pivot Bar goes is Light Blue like your Pivot Shoe 15-015 instead of Black. If it won't work, please steer me in the right direction! ... (cont.)

Have a peachtree 6 foot Citadel patio door #8708 needing handles and lock. Please advise

I need six replacement rollers and two handle sets for 1970 alumn. patio doors. Sliding Patio Glass Exterior Aluminum Door Heavy Duty - 1975 +/- Vintage - Purchased in Boston I can't find any manufacturer's numbers or logos. It seems to be the same aluminum door as used on 1970's Deck Houses. ... (cont.)

The thumb latch on our sliding glass door doesn't seem to latch correctly all the time and it got to a point that it would not close. I was wondering what the adjustment screw is for and it has an arrow on it with the words in and out. Could this be my problem? Does this have something to do with ... (cont.)

The windows in my home were installed in 1966. They are caradco windows. Two of the window cranks have stripped in the interior. It is not the set screw on the handle. Do I need to buy a replacement mechanism; is there one still available for my windows, or is there some replacement gears for th ... (cont.)

I need help identifying some replacement rollers that go at the bottom of what I think are referred to as casement windows made by Pella.

I have attached a photo of the roller assembly for my older model screen door. As I do not see anything close to this actual configuration, I thought 84-017 would do the trick. What do you think? I see the fastener comes with it, so does that mean I do not need to purchase a rivet nut and a pan h ... (cont.)

Hi My storm door came with the level handle in nickel finish. I would like to buy the keyed deadbolt to match but I only found white and black finish deadbolt in your website. Do you carry the one in Nickel finish? Thanks Dennis

I'm looking for four screen door rollers for a Kawneer screen door. The door would have been installed around 1990. I've "fixed" these rollers about a year ago as the screw thread had about worn out. However, they are now fully shot. If it helps in identification, the door has rollers on all fou ... (cont.)

I recently purchased 4 rollers assemblies from you, however when I received them, the roller is 1 1/4". Product code 84-016 The roller on mine is 7/8" in diameter. Do you carry another size wheel or did mine wear out that much? The metal piece and spring are exactly the same on both new and old ... (cont.)

I am trying to help my father (who is not internet friendly) find a replacement for his sliding patio door handle lock. The door is an Allen Stevens coorperation from 1965. the number on the handle is 4392. He is looking to replace the lock. Please let me know if you can help me. ... (cont.)

I was wondering if series 710 would match the image below?

I think the roller or rollers are worn out because the door doesnt slide easily and doesn't slode smoothly. it sort of bounces as it slides. I can't find a model # for this door. It is white plastic coated and i the glass size is 43" wide x 74" high. pLEASE LET ME IF YOU THINK THE ROLLERS ARE THE PR ... (cont.)

I am looking for a Bilt Best or compatible casement operator. I know they don't make them anymore. Can you help?

Please help me to identify the header & footer of spring balance. Please see 4 pictures of the footer and 4 pictures of the header. Along with one picture of the sash spring balance. As far as I know I have a wondow manufacturer named Philips. These sash spring balance came from single hung (non ... (cont.)

Good morning; I am in need of a replacement window shash lock. The window was made by Binnings Blds. Prod. The window sticker has this markings; Code 15-1 HP series Type & code DH-B1-HP Series 500/550 If pictures are needed please let me know and I will try to take them. Any help woud be ... (cont.)

This is from a mid 1990's vintage aluminum double hung non-tilt window manufactured in San Diego, CA. There is a stamped number "2740"; metal part is 28" and 9/16" wide. Can you identify? Need 4 ASAP. Thank you in advance! Hope Hurricane Irene not too disruptive! Michael K.

My wife had a granite top installed on our casement window, now the craanks dont work because they hit, I see code # 39-339 extenson looks like what I need but I cant tell if there is a hole in other end with spline. Numbers on my anderson handle is 7191-8 Hope you can help Allen R. ... (cont.)

Hi, I need to replace some sash pulls for my Anderson Windows. The house was built in '85' and the windows are double-hung ~ 36" x 48" and the part#s show up as 11600-2, 1600-3 and 1600-17. Is there a common part I can buy for all of the windows? Thanks, Todd