Viewing all customer Discussions for:

Door & Window

Can I receive a sample of your product,code #58-022, about 2 ft. I need to replace the weather stripping in 16 vinyl tip in windows and want to make sure I picked the right number.

Please let me know if you can locate the part circled in the attached images! Thank you for your time, Erik T.

The Springs on these coil balances are a little different than your style These are set up in tandem but the coils have a different notch If I changed them using your parts what exactly would I need. include the bottom pivot. Thanks for your time Jeff

I need a screen door roller and your 84-091 appears to be what I need except for one thing. Is the width actually 3/8"? 3/8 of course = .375 and according to my calipers, the one I have is .327 and the slot it fits in is .35. All the other measurements are the same and the picture of the roller is t ... (cont.)

I have installed the 40-165 hinge pin kit in my storm door and it has worked out well. The old pins were so worn it would rub on the latch side! Now the door is developing a squeak and I was wondering if there is any oil I should or should not use on the nylon pins? Thanks for you help. Gord ... (cont.)

Hi, I have ordered these thumb screws 70-112 Long Thumb Screw which are approx 14.28mm in order to replace other thumb screws M4 x 10mm used for mounting lcd monitor to vesa bracket. But these screws are too wide. Is there anything else that is just a bit narrower

Ihave a Pella(?) patio screen door, that I need replacement corners for. They resemble your #95-020 corner, except for: they're Plastic, the thickness is .400" instead of .3/8", and the upper leg is 1.145" across instead of 1 1/8". these differences may be due to being made of plastic instead of me ... (cont.)

do you have replacement pivot shoes for Malta double hung center pivot windows manufactured in 1983?

I have a 1988 double pane sliding window - no brand ID- installed by builder. I am trying to replace broken window rollers for it. I measure the roller unit at 5/6" x 9/16" x 1 7/8". The 1 7/8" hight has room for variance in it. I can send pictures if it matters. can you help? Mark H. ... (cont.)

1-1/4"w x 2-16"h x 9/16" thick picture attached which part number will work for me i have 20" s-600 balancer red

my door is a pella storm door and i need a replacement spring. The door reg. # is05100190506005.Can I purchase just the spring? Joetta

good morning I would like to know if pn 18009 is the right part i'm looking for. Is this the balancer stop that goes on the window if so i would like to order 12 more

I was cleaning out my apartment after my tenants moved out and noticed that a window was not working properly, I found out it was a missing pivot bar. I cannot any info on any of the windows that indicates who made them to try and get replacement parts. However, I took a picture of remaining pivot ... (cont.)

can i just get the lock knobs?

hello, I am unable to identify the door manufacturer and need to replace the rollers. Local hardware stores don't have this 2 piece sttel ball bearing roller. the wheel is 1/4 inch wide and one of the pieces has D-719 stamped on it. Can you offer any guidance as to where to buy. thanks ... (cont.)

Think I have 81-004 but cannot decide how to remove the old one, if it is screwed in from the top (10/32) screw, is there an easy way to get the screw out? If my instincts are correct, the glass prevents access to that screw.

Double Hung Andersen Naroline, C4-86, 1GCC CBA 311 Window glass is: W:32 7/16 H: 15 15/16 Balance has stamped on it D75 7H27 1 87 (the H is very faint and a different stamp than the rest). Appreciate the help Mike

I have an RV with a metal sliding door with roller cassettes that are shot. I've looked around your site and found that my Del Mar toronto cassette most closely approximates your mirror door roller #23-198. Dimensions and shape are very close. However, my cassette has metal wheels. This is an ex ... (cont.)

I have a question about a replacement part I'd like to order. I know what it is but your site does not list color(s) available. I need a 82-040 (Secondary Patio Door Lock) in what I believe Truth calls bronze or I'd call a dark chocolate brown. I see the photo but want to make sure that is the co ... (cont.)

On the Andersen window latch what holds the screen latch too the frame of window screen.? Product code 70-191.