Viewing all customer Discussions for:

Door & Window

I am trying to find replacement weatherstripping for my windows. It is the bubble type and the bubble is filled with foam. It slides into a groove on the windows and is located on the bottom of the moving window near the outside edge. I have been to four hardware stores and cannot find it. I was won ... (cont.)

I recently purchased a 2 family house. I identified the window balances as the 600 series spiral balance. It just seems strange to me that none of the windows will stay up in the entire house! Could they all be broken and need replacing or do they need to be charged with the winding tool? Any th ... (cont.)

do you sell the crank that goes with the Product Code: 39-078 Universal Joint with Pole Eye?

I have a 23" series 700 balance with a "143 japan" stamp. Also have a 15" series 700 balance with a "15 japan" stamp. Is this stamp info sufficient to order replacements or is it necessary to weigh the sash?

I purchased a house a year ago and there is no sticker to identify the window brand I need to get some pivot bar and pivot bar holders for the bottom of window. The top part takes your part number 26-243 and 26-244 and the bottom slot looks the same as the top and that they modified the top pieces ... (cont.)

From the picture the 84-024 assembly come with tension screw and cap and the screw to secure the roller to the screen door. I that correct?

I am looking to purchase a replacement handle for my sliding door. The handle that is on the door now is identical to 82-033 except white. Do you have this part in white?

Before I order, please confirm which part I should order. two identifiable numbers are on two separate pieces of this part that I need to replace. one piece has 20810 and another piece has 30841L. It is either your part number 39-155 or your 39-031. Please confirm which one to order. Mike, Regal ... (cont.)

We would be happy to research this for you if you cannot identify the needed hardware on our site. Please post some images in a reply post to this discussion.

Hi- Trying to locate a replacement balance (non tilt, 1/2" channel)used in a window built by NuAir in Tampa Fl. (they are out of business) I am having trouble doing an ID from the pictures on your web site. Can I send you pictures of what I have? Also, the balance is lifting insulated glass and wo ... (cont.)

If you would like, post pictures of your current balance and we will take a look to see if the S350 balance is a good match. Include close up pictures of your balance bottom and top.

The 59-270 Foam Screen Spline would be the next size up.

First, check the length of the balance (exclude fittings for this measure). A Series 370 balance with stamp number 2410 normally measures 25" long. If the series 370 balance you are looking to replace measures 25" go to the following link to get started: S370-25, and choose option 2410. ... (cont.)

Hi, I want to replace channel balances in two windows, one of the window balances are marked as follows: 33 4 GO and 33 2 FO they measure 34" long and are 9/16" wide with a hemmed edge while the window measures 34.75" long x 44.75" wide. The second window measures 33" wide x 29" long and the balance ... (cont.)

No, SWISCO product code 81-151 has two flat edged wheels and the 81-149 rollers has concave wheels.

I have balance stamped 27F ra BSI looks like the one on the pictue series 795. Approximate window weight should be 34-38 pounds. I don't see option F on you menue. Do you carry that replacement. Made about five years ago. Thanks, Robert

I believe they slide in from the top sides. You will have to remove (or loosen) the top rail on the sash to slide in the new latch. You may want to have someone familiar with window repair help you out with this process.

I have 3 contiguous heavy sliding glass exterior doors, 2 @ 4' x 6'-8" and 1 @ 3' x 6'-8" and I cannot locate a manufacturer's name anywhere on any of them. I have broken a keyed pull handle on one door and the handles on the other two don't match in color, though they are both intact. The pull sc ... (cont.)

ref Product Code: 90-115 what is the dimension of the length, I see only the distance between holes. thank you

I need to replace a pair of channel balances for an aluminum non-tilt single-hung window. The metal length is 28". The code stamped on the current balance is: "27 6 ER CALDWELL"From what I can tell, it appears to most closely match the Series 351 or Series 390 on your website. The bottom shoe mea ... (cont.)