Viewing all customer Discussions for:

Door & Window

I am looking for a 1-1/4" T LOCK BALANCE SHOE. It is almost exactly like your 1" model (Produce Code 15-194). It looks identical except for the width, mine is 1-1/4 inch. The one I need is the one that comes on the series 795 channel balance (Produce Code S795-27). If you compair them side by side ... (cont.)

Hi, here are pictures of the keeper and lock I am looking for. The keeper is broken. I would also like the window stopper as a few of mine are also broken. All parts in white please. I have no idea who the maker is of the window. Also, it's difficult to make out but on the face of the keeper above t ... (cont.)

hi, I have tilt windows that appear to be from home depot in 1997. You have parts that seem to be close but not exactly. I would love some help to make sure I get the correct parts. Approximate Measurement of pivot shoe: 2 1/16" by 1" -- I have not removed it out of the track yet, so if you nee ... (cont.)

Would like to know where I can buy Pella screen replacement corner pieces. Each leg of the L shape part is .500" X .373" X 1.75 (with tapered ends) color light beige. I have replaced screens on all windows except the ones with broken or cracked corner pieces due to sun exposure.

I have 2 casement windows in my kitchen where recently the cranks have came off and we are unable to open or close the windows. I am not sure on hopw to idently the correct replacement parts that are needed. Also, are there any options that you offer to assist in installing these parts other then ... (cont.)

product code # 81-056 is available with 1" or 1-1/4" diameter wheels. Mine measure 1-1/8" at the outer edge. Should I go with 1-1/4" ? Thanks, Doug

Is the window missing the balances the same type and brand of your other window? Attach some photos of your current channel balance system to your reply post.

I am looking for 8-3/8 inch Anderson straight arm operators

We have a block and tackle that has a stamp 3030 HD B.S.I. It looks like your S390 but the stop shoe looks different. The top shoe on the bar that we have does not have wings. The top shoe on your S390 is the 19-005 but has wings. Ours does not have wings. Can you help us identift what we need. The ... (cont.)

I ordered some series 351 channel balances based on your recommendation that many customers find that they work for GapCo windows. They DO work, but they are not exactly correct - the window has some left-right play as it goes up and down. I was reluctant to actual take out the old balances until I ... (cont.)

You should check the balance you are replacing for any markings numbers and/or letters. The stamp options refer to different strengths. 15" Series 770 with stamp option 15B will carry a window sash weight range of 7 through 10 pounds 15C will carry 10 through 16 pounds 15D will carry 16 through ... (cont.)

Thank you for contacting us. Please take a look at the 39-147 Andersen Window Crank, 4 1/2".

I have a LH exactly like the 39-094, my question is the worm gear removable on this assembly or is it attached with a clip in the housing as one assembly? I am curious as to what holds the worm gear in place. If this assembly comes apart I then assume the operator cover is the only assembly holding ... (cont.)

You might be looking for SWISCO product code 70-005, Wire Tension Spring. The top of the spring, angle portion, is what sticks out of the hollow screen frame. If this is not what you have been searching for, please send detailed images by attaching them to a reply post.

Good morning, my name is Patrick, I work for the City of Peoria in Arizona. At our baseball stadium we have hung windows in our pressbox. The balances that hold the windows up are going bad or are bad. They measure 43 1/2" long and are 5/8" diameter. What is the cost for a new balance and what i ... (cont.)

Yes, it appears the 55-120 3' Snap-in may work as a replacement.

Hello, I don't know the exact name of the windows. I think they are Stanley Awning windows, the parts that I'm looking for are plastic and go on the lower left & right of the window and hold a bar in place. Thanks, Please see the attached and let me know if you carry these parts. ... (cont.)

We would be happy to research this for you, please post some photos of your pivot bar with measurements for us to look at.

I am in need of a replacement doorknob kit for a 7/8 inch Emco Screen Door. Can you see if you carry this and what would be the part/number. I originally ordered the incorrect part for a 1 1/2 inch screen door. I intend to send this back to Swisco

I need to replace my sash lift. It looks like 20-007 and is 4" wide, but the screw hole centers are more like 3.5" apart rather than the 3-3/16" in your diagram. I just wonder if your diagram might be wrong by chance? Could someone doublecheck to see if indeed they are 3-3/16" ? Thank you ... (cont.)