Viewing all customer Discussions for:

Door & Window

S795-27 with stamp option 27D will carry a window sash weight range of 22 through 26 pounds. Check the width of the shoe on your current balance, the balance shoe of the Series 795 measures 1-1/4" wide. If you are unsure of the balance series you selected, please feel free to reply with detailed ... (cont.)

My Malta windows are about 12 years old. Innept window washers twisted the windows and let the springs snap up, breaking of the hooks at the top of the show. Your product doesn't show a hook at the top of the shoe Will your shoe work as a substitute? How does it attach to the counterweight sup ... (cont.)

i would like to know if the handle ;code 88-004 ,bolts on thru the edge of the door

Which pivot shoe works with pivot bar #26-272 3"?

The window code on mine is 26c? What will be a good match. So far I know I need a S377-27

I FOUND THE BLANCER ON YOUR WEB SITE.I WOULD LIKE TO KNOW IF I CAN BUY THE JAMB LINER WITH ALL THE HARDWARE AS ONE UNIT.

I am sorry we do not have the ability to look up S/N numbers. We can look into providing a replacement for you but we will need a description of the door and the latches you are trying to replace. Please provide a photo if possible.

Unfortunately the 81-007 does not come in Stainless Steel.

Zinc Alloy housings and anodized aluminum faceplates Nickel plated hooks Stainless springs

can you tell me if the 39-083 is rear mounted, and what the space is between the mounting holes?

How difficult is it to replace the 95-181 Pella window screen corners? My screens have security wires threaded through the mesh.

Hi. I need to know what the part is in the top corners of this bottom sash of a single hung window, as the piece on the opposite side broke and needs to be replaced. Unfortunately there is absolutely no marking, name, or numbers on the windows, the frame, or the piece itself to ID the manufacturer. ... (cont.)

We would be happy to research this for you if you cannot identify the needed hardware on our site. Please reply with photos of your existing sash support balance system so that we can take a look at the system you are replacing.

I have an Owens Corning window about 25 years old. Non of your pivot shoes show the correct notch I have. The pivot bolt #26-056 tip profile only (not the whole bar) shown here is what I have. The pivot shoe 15-047 is shown to be used this relate item. The black cam looks like the opposite notch ... (cont.)

This item seems to be the exact dimensions I need for replacement, however, my existing roller corners also have 4 screw holes tapped into the corners to secure the aluminum frame to the coreners. The 84-011 product picture does not show the screw holes, but do you have this model with screw holes? ... (cont.)

What is the diameter of the inner most section (1/4"?), and the outer sections of the axle of the 81-304?

The balances I'm replacing have a tube that is 27"3/4 long. The tubes are plastic. The cam is 5/16" wide. The plastic tube is 7/16" wide. They have black bushings and are for tilt out windows. The total extended lenghth is about 50". What balance do I need to order? My sizes, colors, and plast ... (cont.)

Internal parts of balances are not sold separately.

We have purchased one set already. We need a replacement part. The threaded block.... Can you provide us one and at what cost....Thanks Allure Windows and Doors

My current channel balance is 37" long (metal to metal), and has the 19-005 top guide and the 15-005 bottom shoe. The back of the channel is stamped with "36 4". Which series of your guides would replace this ? Are the differences between the various Series of balances (350, 351, 370, 371, 377, ... (cont.)