Viewing all customer Discussions for:

Door & Window

We ordered these and do not know how to install. The large screen seems to big and the small nail too small. how do you install these???? There is no information at all. Should the bottom be able to move. Please send me detailed information. we ordered 40 of 70-056 (Screen Hanger Kit) - Order 2 ... (cont.)

The pivot lock shoe I have locks to the jamb width wise (1-1/4") and is all white Will this cam (15-121) work since it locks the jam thickness wise (9/16")?

Is the 90-095 keeper body wide enough to cover the hole when it is used to replace the discontinued Metal Recessed Keeper?

I would like to know if you have a smaller version of item 67-009. I need a 3/8 th wide guide for my window screens

I would like to install new faux wood blinds at my kitchen windows. However, the crank handles stick out too far to allow the blind to lay flat on the window sill. By installing the 39-298 T handle would this allow the blind to lay flat on the window sill without the handle interfering with the bli ... (cont.)

Are the Anderson T cranks (39-286) inerchangable with any other brand of windows/ cranks? If so which ones?

how do you replace the 26-119 tilt latch?

It is my understanding that the handle should spring back to its original position.

The length,(the best I can tell from measurement of the broken spiral balance)I need to replace is 28.5" Should I order a 28" or a 29" spiral length from Swisco? We look forward to your speedy reply.

I've added two alternate images below. The 40-038 Storm Door Handle Spindle works with this latch. Please let me know if you have any additional questions.

If my window is weighted at 20 lb. and the channel balance is 32" long and 1/2" wide and the top and shoe attachment looks just like the series 380; should I get a pair of 3110 (for ten lb each) or 3120 (for twenty lb total) to replace the two old balancers? Thank you for the help, Micahel ... (cont.)

How can I take the pivot bar apart from the window?

I was unable to find my type of assembly on your web site. Do you have or can you tell me wher I can find these? Doors are 45 years old. Thanks, Al

I believe I have chosen the correct Channel but the image is too rough to verify the choice. Is it possible to send an example and have it returned with the order? Here's what I have so far... (6) S380-26 : Channel Balance (note: 2540 BSI label from the part) (4) 62-105 : Heavy Duty Pointed ... (cont.)

Here is a photo copy of a top guide I am trying to find? Mike

Please give me some instructions on the installation of my 380 series balance rod.I tried to install it on my own but could not get the hook on the rod to slide in correctly in the open slot on the side where the rod needs to hook and stay firmly in the original position.As a result of my effort, th ... (cont.)

There appears to be a mounting hole on the top of this assembly. What is the distance from that hole to the non-wheel end of the part? Is there a bottom view available? I need to determine if a screw driver can reach that hole from the bottom side of the part. My intent here is to drill that hole to ... (cont.)

I have Thermal-Gard windows which are probably 30 years old. I need to replace the PIVOT SHOES on a bunch of them. This is what I found. The measurements are virtually identical to your 15-070 except there is no "cam section" thickness listed on your photo. Also, on the one I have there is a ... (cont.)

I can not find a number my channel balance. It appears identical to the model S372-19. What are the various options 1810, 1820, 1830, 1840 mentioned? How do these options add too or change the balance?

The external tab on my anti-slam button (A-shaped internal metal part within the mortise lock assembly) has sheared off. Can I purchase the anti-slam button part separately or do I have to purchase an entire 82-238 mortise lock assembly?