Viewing all customer Discussions for:

Door & Window

Are the 84-066 mounting holes spaced 2 1/16" on center? With an adjustment hole centered at 1 1/4" ? THANKS

Bought 380 -24 channels and need the right sash guide.

Just want to make sure I have the right bar. Is there an end view of the 26-226? Mine has a round end with a rectangular slot that locks into the cam on the tension spring.

I have windows of unknown manufacture, and the tilt-lock shoes have shattered (where the balance hooks in). They have a TEAL cam (like #15-015) but have 3 teeth (like #15-118). Which one is more important. Size is too close to measure.

Do you have the flat spline for the new style Anderson stom door screen frames? It is about 3/8" and not like other flat splines?? Thanks

Is the tab on both corners or just one?

i have wood doors my corner is inclosed you cant see the screw you may know what iam saying plus i dont see the lenth from corner to end also my door takes 4 of screen door wheel corners like the 84-026

What is the distance of the 8-32 tapped hole form the non-roller end of the 81-002 assembly? What is the distance between the two threaded holes in the non-roller end of the assembly? What is the distance from the top of the assembly to the center of the top threaded hole on the non-roller end ... (cont.)

How do you install the 90-026 in place of the broken ones already there? The current ones are not installed with screws.

We do not stock the White Tip because the weight range is so close to the Red Tip S900-25 White tip will carry a window sash weight range of 6 through 14 pounds S900-25 Red tip will carry a window sash weight range of 7 through 21 pounds This information is based on 2 balances per sash. Bal ... (cont.)

do you have ss wheels 1 1/4 by 5/16, 1/4 axel.We have a gulf salt spray condition... None of your double rollers were an exact fit. Thank

87-034, sliding roller measures 1/2" in overall height.

Does the 39-104 have a hinge so it folds over against itself?

I believe that the 84-070 is likely to be the replacement roller that will work for you but, you should still remove one of your old rollers and match it up to the 84-070 product picture to be sure.

I need a pair of sliding screens w/bottom track for an existing french door pair. How does the 80-111 install on an existing aluminum threshold?

Our screen doors are very old, over 30 years but are in excellent condition aside from the springs needing to be replaced. I cannot find any matches locally nor can I find any information on the doors that says who manufactured them. We have open barrel hinges. One side of the hinge attaches to t ... (cont.)

I have new vinyl windows and the screens just slip in. If you bump the screens they just pop out. I was thinking of adding some sort of spring to help hold the screens in. Which type of spring would you suggest.

hwo do you remove and install the 15-111 pivot block?

Can the 87-087 also be used as a bootom guide? I have an older model home(1980 Country Cottage)I have been searching for replacements to keep windows from rattling and to make slide easier.I think these look like the orginals.couldn't get your picture to enlarge to really see.