Discussions for Door & Window : SWISCO.com

On model 18-061, what is the distance from the top base to center of screw hole?

Where can I find 82-013 in a 4-1/2 size?

This 84-026 looks closes to my roller but to be sure I should remove it so I can get the exact dimensions. Can you give me directions for removing this item?

stamp 2900 bsi

stamp reads 2900 bsi

Will replacing the inside handle help fix the outside handle?

inside handle worn out, lets the outside normally horizontal handle drop verticallly. will replacing inside handle with the 40-150 resolve outside handle positioning?

What material is this crank handle made out of?

Is the 39-121 crank handle made out of aluminum or what type of material? Thank you, Tom

I am not sure about the stamp on my balancer

For the Series 795 at 27 inch and looking at your current stamp number you most likely need the 27c stamp option. To check, remove the window sash and place it on a scale. The S795-27 with stamp option 27c will carry a window sash weight range of 17 through 22 pounds. This information is b ... (cont.)

Track with the bead down the middle

Is this track (# 80-106) the only one you have? The one that I need to replace just sits free in the bottom of the patio door, and is 1 & 5/8 inches wide, with the "bead" down the middle. Will your track that is only 15/16 of an ich wide work under my sliding door? Thank You Greg Sandercock ... (cont.)

How do you remove the 84-020?

I am trying to remove the 84-020 bottom rollers and am not able to do so. Is there a certain way.

doggie panel door(panel has a dog entrance on it)

A picture would be helpful so we can understand a little bit better about what type of rollers could work for in your situation. Can you send us a picture of where the roller mounts to panel?

Are the rollers on the top of the window necessary?

Finally! I think you have the rollers for my 35 year old slider windows I have been looking for (87-162)! There seems to be a set of rollers on top and the bottom. Are the top rollers needed or are they there if you turn the window upside down to use in the other direction upon installation. I don't ... (cont.)

Neutral

Does Neutral mean the 26-188 can be use for both left and right hand side?

How do you remove the old Pella window crank?

i think the 39-097 is the part i need....window glass 24 1/2"x 36 1/2"...mid 1970's....how do i remove the old one to check the measurements...thanks

Are these latches for 1981 thru 1988 Andersen Screens?

Are the 70-174 latches the latches for Andersen window screens sold in 1981 thru 1988?

4 INCH DOOR KEEPER

DO YOU HAVE A 4 INCH DOOR KEEPER ..IF NOT CAN THIS ASSEMBLY REPLACE WHAT i HAEV ...IT IS AN IN SWING DOOR INTO MY BREEZEWAY

spindle measurement

how do you measure the spindle. diagnal or across? does the 40-150 generally fit a larson storm door 4 post?

Dimensions of the 15-046 pivot bar opening

I have sized my current (broken) pivot shoes to match the above pivot shoe (15-046), although the style is very different. My question is will these shoes fit most windows? Are the notched openings in the bottom a standard size?

screen clip & pop rivet

How long is the handle on the 70-026? I need a screen clip that is 1" and the screen clip 70-020 looks too thick. My screen has a handle that looks like this with a pivot in it but is flat like this one, not 70-020. Also can you tell me if your pop rivet #44 has the rod attached to it for convience ... (cont.)

door lock

What make is the 82-303 door lock?

spline color

what color is the 59-067 spline? Can I get a sample?

Viewing all customer Discussions for: Door & Window

Viewing all customer Discussions for:
Door & Window