Viewing all customer Discussions for:

Door & Window

Currently the 39-017 replacement window crank is only available in the color gray as shown in the product picture.

What are parts included when you order the 82-013: inside pull and latch, outside pull and keeper, and all necessary fasteners? What is approximate shipping time and cost on this item to Houston using UPS ground? Thanks.

i have 26 frames of glass jalousies and where the glass slides into the frame they are rivited and they are old and breaking up. do you have any replacement frames or any way to fix them? thanks

How to you remove the old wheel (81-223)?

First remove the window sash to get to the top sash guide. Hold the window sash frame firmly together when removing the top sash guide and reinsert the screw and new top sash guide immediately so the frame doesn't fall apart. This screw not only holds the top sash guide in place it holds the ... (cont.)

I would like the dimensions of your Product Code: 70-026. I need to know the height (or thickness) at all three sections (Leg, hole and arm).

i have looked at the latch on my windows cannot see how to remove latch the only way i think to remove it is to take scre out of side frame and part frame and then remove latch is this correct (26-334)

How do I replace the window corner when the storm screen has a crimped corner ?

Hi, can you tell me if the 40-164 would fit a 1 3/4 inch thick door? Thank you

Dear SWISCO, I need parts to repair the windows. Do you have the parts? I have the broken parts and the windows I use in the following link. Thank you.

when charging a new spiral balance (S600-20) what is the most turns you can do total i know it s 2 clock wise at a time and 1 counter clock wise at a time

does the 39-078 fit anderson casement windows?

I have a vinyl window double hung tilt and need to replace the pivot shoe (15-045). How do you get it out of the track?

I plan to order Uniframe Awning windows that need this kind of adaptor to operate from a lower level. I do not know the kind of gear that they use for the regular handle. Will the 39-078 work with that window and if not do you have another product that will work?

Can i get a spec drawing for the 87-133 replacement wheel. Especially the dimensions for the concaved part of the wheel? Thanks

Your online catalog says that the 84-009 wheel is 1" dia. and 1/4" think, but what are the rest of the measurements, ie. how long overall (my existing ones are 1 1/2")

It is possible to purchase a replacement screen door for your Andersen patio sliding screen door. The after market sliding screen doors available at the big box stores are not very good and will not work better than your existing door. There are smaller companies that manufacturer after market sli ... (cont.)

My patio screen door is 77 in. high with an opening for the bug flap (59-054) of 1/4 in. I presume your bug flap will snap in and expand to hold the flap on the door.

I have a customer that needs a new track and window crank set up. The problem I am having is the track is 16 inches. The window is 16 inches. Do you have any replacements for it. Or a suggestion? Thank You. Felicia Ham

The width of the interior plate of the 40-049 replacement lockset is 7/8", note that the exterior plate is the same width. Take a look at the following picture that shows the interior plate with the width dimension.