Viewing all customer Discussions for:

Door & Window

The handle is missing off the lock what do I need. The one picture is what it's supposed to look like and the other is with the window trim off and missing brown handle

This window has been a pain for me. The window did not stay up. I tried replacing the balance earlier this year by going to a local window store. I bought a new one for one side and it still doesn't stay up... It's a Gorell G5155 (I believe?) double hung window. Sash weight is 21.6-21.9 lbs. Ple ... (cont.)

Locking system will not lock at all. It will unlock if you wiggle it several times. there is a number on the latch 58C1. I did not remove the system because this window is to the south and catches a lot of wind.

Channel has a metal center labeled "b 20HD." Windows seem to function well but the color of the channel stands out from the white windows and we want to see what we can do. The plastic (vinyl?) channel component is not solidly secured. It is very flexible and can be pushed easily toward the jamb. ... (cont.)

Trying to identify my door so I can get a new roller assembly for this door

Hi I am looking for a replacement handle of this exact handle or handles similar to replace the handles I have on my dresser, chest and nightstand . The size of the side plates would need to be larger than 2 5/8 inches long. The handle itself is 6 3/4 inches across and the vertical holes for the ... (cont.)

The Length of the entire length of the metal is 27 inches. the stamp is" 26-4 EG5 CMC 54" I have also attached a picture of it. Millguard is the manufacturer. we would like to get one unless they should be replaced in pairs.

Need to replace this

Hello,Please help me find this part at your site. Please photos for additional information.I believe the windows are an Anlin brand.Thank youKarem

The door was installed in 1995 when the house was constructed. I don't have any documentation but based on an internet search I believe the manufacturer is Joyce Manufacturing. The mechanism is a tandem roller and the front wheel the one in the pictures is more worn and the bearing in very worn. ... (cont.)

I need to replace 3 window balances, all stamped 32 9 BSI OR. This product looks like the closest match https://www.swisco.com/32-inch/pd/Series-385-Channel-Balances/S385-32, but it's metal length doesn't seem long enough. The measurement of the metal length only, for the window balance that I hav ... (cont.)

will a nylon roller work instead of metal

Trouble finding this part

Trying to find a replacement operator under side faintly notes P4800

I need to replace all these in a home. The windows slide up and down. They are a two hole

My window balances need to replace they have a hook at the top which they're screwed into the window frame and then connected to the string and connected inside. You have a part string part in the connected at the bottom. There's a T-shaped piece comes out of the bottom of the window and I presumed ... (cont.)

Looking to replace multiple window locks that are broken. Markings on the part are:Truth HardwareCAV.2P.N.41131Used on Marvin windows. Tab on the underside of lock (shown in photo labelled "Window lock 2" rotates with secondary latch movement (shown in photo labelled "Window locks 4") to release win ... (cont.)

Need 2 balancers for single hung non-tilting window. Window is 13 pounds. Stamp on channel is 20-4 ak5 cmc 50. 1/2" x 21".

Circular part on bottom is missing from the other side, top of the window does not stay closed on that side. Thanks so much!

Do you have a part replacment for the internal slider or is there are handle replacment?