Viewing all customer Discussions for:

Door & Window

When you open the window the 11" arm slides on the track And is attached to the window, a 5" arm goes from the 11" arm to the track with a 2" arm that goes from the track to the back of the window, Track is 17" long, A 11" arm slides on the track, A 5" arm goes to the track, A 2" arm goes from ... (cont.)

Hello Swisco, I am looking to match up a tilting window lock. I attached some pictures and dimensions. I believe I have most dimensions needed: Width: 1.041" measured Length: 3.041" measured measured Depth: 0.330" Centers between screws: 2" The window sticker says Republican by Centex Pleas ... (cont.)

I would like to purchase a replacement coil for my Certainteed Window. I am told it is called a double coil balancer. The numbers on the window sticker are: 26296400.3 BMDH3 Can you help? Thanks!

Have Anderson window balance it's marked 927 also has 11600-17 stamp. Want to make sure i order correct balances

Top and bottom pivot hinges for commercial storefront door

I think this is an Alenco casement part but am now sure. I need to replace this part on a window that has rusted and no longer is work. Need to replace rusted parts per pictures - need a source - do you have these for a Alenco PlyGem 26x60 Single Casement window

I believe it's a window tilt latch clip. No part numbers on it. Window might be by prolia.

Hello, I have a window that has broken pivot shoes on both sides (I assume that's what they are called). The plastic piece that holds the metal cam in which the lower window rests broke. This piece also attaches to the springs. I attached a picture of the remaining half of the pivot shoe and spri ... (cont.)

Need a compatible door handle and keyed lock for 5500 Simonton inovo patio door.

The right handle has become worn and bent preventing the window from opening. I bent the part back but after some use it again isn't opening and closing. Need to replace the handle. Can you recommend a part number?

The hinge pictured is the one in good condition, I need one similar to that one to replace another one broken in another window, as well as the handle that twist to open and close the window

Hello, need this part. It prevents the upper sash from going all the way down. It is 4 1/2" above the sill. It is 1 1/4" wide, 1" tall, with a reach of about 7/8". Thanks!

Hi, We have two old bay windows that are in great shape except we can't open the windows without having to manually assist :) Any assistance you can give would be appreciated! Thx

I need to replace my existing window balances, I found them on your website. Item described below. My question: is there such thing as a left or right or are they interchangeable? The ones I have now say 8R and 8L which makes me think they may be side specific? 8 lbs Series 161 Roller-Tilt, Pr ... (cont.)

Length of metal channel: 19 5/8 inches Stamp: 19 4 Milgaard 3210sh 032-157 One balance needed

Hi as you can see I believe that the pieces of either plastic or rubber that are going between the frame on the window itself appear to be missing or broken. Also seems to be a height loss as a result of this missing piece that allows the top Edge of the window to not be stopped by the top rail piec ... (cont.)

Not knowing what I need. Just bought this condo, there is a double latch in the side for attachment.

I just bought home and a few of these are broken and they are carved and screwed into windows. There is no brand on this part nor I can find the manufacturer of this window frame. The latch is manufactured by truth part number 45086. Please help

See photos for all markings and hole patterns. Thanks!

I need just one 1/2, the receiver part, to this Anderson sliding glass door.