Viewing all customer Discussions for:

Door & Window

Model 2600 or Model 2620. Lock set & handle replacement part.

I need help with these replacement parts. I believe the windows are American Craftsman . The latches and sash springs are broken. Not sure how to remove the lower sash. thanks

I need a window operator. The connecting arm is 9" long, distance between screw seats is 5".

Hi. I need this type of balancer. Do you sell them? ThanksMichael

Hello I need replacement parts for milestone series 1000 single hung aluminum windows. The only markings on the channel balance is unique 26-B-20, and 10-99-99. The window from the out side measures 55 1/4 height and 36 width. I also need top and bottom plastic sashes and the clips that go into the ... (cont.)

Our 2-3 windows can't open and close, 6 fog windows need replace , please contact me as soon as possible, thanks. David

Windows are no-name, contractor grade, single hung panes, though double glazed. Bottom pane weighs 20 lbs. Coil insert measures 1 1/4" wide (at widest part that fits in channel), 3" top to bottom. Cam lock measures 5/8" on inside, 13/16" on outside edge.

Crank threads are stripped, window opens but can't close by crank. Hoping to go through and replace all in house. Windows ordered by previous homeowners so don't know anything more.

Looking for screen retaining clips in white. I will also need the rivets and rivet gun.Thank you,Len

Looking for both left and right side sash locks in white. Looks like 2 5/8.Thanks,Len

Need several right and left. Marked 1 and 2 onBroken ones.Note the screw are off center. Thanks

I have a broken casement window operator. The only ID on the window is stamped on the sill track & is R 902 WC. This is an egress window and the dimensions are greater than the operator I've seen on this site. Photos follow - Thanks in advance if you can be of help.

I am looking to see if you have Hurd screen frame Corner clips in a goldtone color. I attached pictures showing the gold color and the measurements please let me know availability and prices. I am looking for some h u r d goldtone colored screen Frame clips. The leg length is 1 3/4" and the width of ... (cont.)

I'm looking to replace my plunger pins on my screen windows. I was hoping you could identify which ones I need. I've included two pictures. Thanks

there is a D on the coil and a 9 on the platic

Hello, I have an older Viking window and both tilt latches have broken so the bottom window pane will not stay in place anymore. Can you please help me ID a new set of tilt latches? The latch measure 2.5" long. On the underside of the latch is a "59" written on one end, and in the middle of the lat ... (cont.)

21" channel length, with no stamp visible. Milgard window, built in the 2000s or 2010s. I'd need two balances. Thanks!

These parts are all starting to break at the same time, I will be in process of opening a window and I will feel it give and then the metal bracket shoots up the channel because the part has failed to hold. Is it possible to replace this? Do you have this?

Hi there, Does this wheel look worn? If I wanted to replace it/them -which replacement part is it? Thank you.

Windows are 32x60 approximately