Viewing all customer Discussions for:

Door & Window

I need to replace a broken Caldwell block and tackle for the subject window identification on the broken on shows Caldwell 28-3 EN. Could you please let me know the replacement Block and Tackle to order

Need T spline to replace window screens

I have a hard time finding this piece. It's for my window. I tilted them around for second image.. The piece broke off. Energy Star Window.

The 1st imagine is the part I am looking for. It is for a casement window that is 43" in width and the height is 26". Also, is it easy to fix? Thank you

We recently replaced all window operators, but there is a domed screw/rivet type part which is broken on the other "arms" of the window, as shown with the blue arrow in my photos. Do we need to replace that other set of arms (don't know what they're called) or may we just replace that little domed s ... (cont.)

This window has not worked since we bought the house. I decided to investigate today and as you can see in the photo it looks like someone installed one side too high. The other side was attached where the round hole is. So, I need 2 of these. They have "28C BSI TK" stamped on the side if that is he ... (cont.)

My door handle on my sliding glass door is broken

Need the part numbers and how to replace them thank youWatertown

Need replacement window guide clips

I have one window that will open but not stay up. When shut, it does not close all the way, so I'm not able to lock it. I was determined today to maybe figure it out, lol. I removed the bottom pane and saw on both sides, cording attached to a piece in the side slides. When I looked at the botto ... (cont.)

Hi Need 4 Stamped 25C bsi 26"x1/2" don't know manufacturer Thank you

Window dose tilt out for both panels. Looks like blue color on one that is there.

Looking for these balances and catches

Vinyl plastic strip to hold in full size screen door

Need to replace two of these roller assemblies. Roller is 1.25" diameter - cast zinc body is 0.60 inch wide.

I have a broken window channel balancer from a Pella single hung window. From my research, it appears to be a Swisco 795 channel balancer. The channel length (channel only) is 26" long, and the lower pivot assembly is 1" wide. The top cord attachment is a hook rather than a screw attachment. Thi ... (cont.)

The park has number 0918 on it

Would like to know the name of this part so I can replace it.

Greetings:1/2 inch wide28 inch long 2740 option codePlease let me know which balance is needed.thanks,Keenan

I am trying to find where I can replace an old rubbed bronze shower door sweep. To replace the sweep you have to unscrew two screws and the sweep drops out of the bottom of the door with a metal strip attached. I think the shower is made my dellta but I am not sure. Any help you can provide is great ... (cont.)