Viewing all customer Discussions for:

Other

Do you have this rubber insert for my door?

Looking for new balances

Our sliding door won't unlock. Need to replace. Thank you

Good afternoon, We are needing to find out if you carry this type of spring. We need a few for a property we are selling. I look forward to hearing from you soon. Thank you

Pretty sure it's an anderson screen door 25 or 30 years old.

The wheel is 3/4". It is offset 5/8". I could still use the 1/2" off set and shim it, but the 3/4" wheel that I need is not flat like your wheels but more rounded to fit in the track.

the operating track, arm, hinge bar, hinge post, black plastic hinge guide for 9700 series casement window. 6 foot by 2 foot made by MI Home products. they gave me this address. the windows are 1996

Hi, Jim.Your balance looks like it could be a match for our S380-27 or S385-27, depending on the bottom shoe depth. The Series 380 has a 1" deep shoe and the Series 385 has a 1-3/32" deep shoe. Measure as shown below to determine the best fit. You will also need the 2640 strength option. ... (cont.)

Looking to replace the drawer glides with a replacement kit

I need one new top sash guide Could it be the 18-200 listed in your catalog? the balance in this window is just over 1/2 inch, probably actually nine sixteenths. It's a 21" tall window that is 46" wide. The number on the balances say Nineteen ninety, but I've already replaced them new ones. ... (cont.)

The metal channel is 26" long. Can you also advise the approximate weight of window. The window is 33 and 1/4" wide x 28 and 1/4" height.

Looking to purchase 5-6 sets

Thinking I need a modified 39-032My long arm is about 5 1/4 not 10 3/4 as in the 39-032 version...so I need a 39-032 with a 5 1/4" long arm (not 10 3/4 as in the 30-032)My window hinges are on the left side of the leverDoes that mean I need the 39-032 type of lever?...or do I need the 39-031 version ... (cont.)

Hello...might you have something similar to the under drawer clip?

I need a keyed lock so it can be locked from inside with a T bar handle and locked from the outside with a key. Right now can only be locked from the inside.

I'm looking Crestline plunger pin latch for screens purchased in 1999. I'm not sure if they are 5/32" or 7/32". How would I measure to find out? I'm adding a picture to show you what I currently have.Thank you.Keith

this part hold the storm window in place --plastic flat screw along with a metal wood screw housed in a plastic bracket

I need two window balances for my window. The metal length is 33 inches. The metal width is about 9/16 inch. The metal depth is about 5/8 inch. The weight of the sash is 34.8 lbs. Please help to identify the replacement balance.

Hi , I am looking for a replacement track for my sliding patio door . I attached a photo of the existing tracking and the manufacture tag. Please let me know if anyone can help thanks

I own a Quanex Series 1580 screen door and would like 4 new roller assemblies and brackets. Could it be Part #20.70.00.1387?