Viewing all customer Discussions for:

Other

Looking for neuma door weather stripping for double door high impact. Something you inventory?Thanks Scott

The part I need is the lock mechanism for a door that locks at three points: a slot in front the mechanism and at two other slots a couple of feet above and below the locking mechanism, which drives a sliding strip to operate the upper and lower locking devices. The mechanism has the following numbe ... (cont.)

Hello: Attached are photos and dimensions of an Andersen operator I'm looking for?.. I would like to find out if you have a replacement based on the dimensions of the Andersen part. Because the wheel is square would I need a new track to go with the new operator's round wheel. The diameter of the w ... (cont.)

I need some of this cranks handle the arms are 12" long

I am trying to find this replacement. It has an extra part I can't find anywhere else. Little arm with a black plastic part that slides along one shaft - See pic

Metal length is 24 inches. In need of 4 balances. It looks like your series 380/385, but my bottom shoe measures 7/8 inch. Not 1 or 1 3/32. This is custom?

I need to find sash lift handles for Double-hung, tilt-in windows. These windows were install in the home we purchased 4 years ago. I've looked and looked and have not found any information identifying the maker nor model, so I've included a full view of the window, and the locking mechanism (n ... (cont.)

I'm looking for four (4) sliding glass door roller assemblies as shown in the attached photos. Its dimensions are 2-15/16" long x 1-7/16" high x 3/4" wide. I couldn't get a tape measure directly on the roller, but the o.d. of the roller appears to be 1-1/2". There weren't any markings on the door, b ... (cont.)

The Springs have broke on my double hung windows and I'm not sure of the part number, but I've attached a photo...I hope you can help!! Thanks,

Attached are three pics of the window weatherstripping that I need to replace with measurements. Can you let me know the correct replacement that I need to order. Thanks.

Could someone help me identify a match in your catalog for these? I am not sure when I look at available SKUs. We have several screens that have lost one or the other. Most likely I would need three pairs (left and right).Thanks,Neal

Hi - I can't find this type of guide on your website? Please help. I checked out the 19-004 and I reviewed the customer questions but the dimensions don't match. Thanks.

I am looking for replacement pivot lock shoes. The shoe is 2-1'8" tall. I have not tried to remove the shoe(s) yet, but the channel dimensions are 1-1/4' wide x 1/2" deep. I would like to speak with someone as I damaged these shoes while attempting to remove the sash to replace the balance. ... (cont.)

Would this be a custom balance due to the shoe, or could a series 380 with a 1" shoe be used?

Need bottom track for 6ft monarch mirrored bifold doors. These are quite old doors but in very good condition except for the bottom track. We are redoing our entire bedroom but would like to reuse these mirrored doors. Any help would be greatly appreciated. Thank you in advance for your time and adv ... (cont.)

Hi My house was built in the 60's, porch is all awning windows, I have no idea on who makes them, hopefully you'll be able to help me, the pictures show the broken"missing" pivot pins

Hi. I need help identifying this part in the photos. They continue to break when I take the windows out, and it helps with lifting the widow. Without it, the window doesn't stay up by itself. Do you know the name of the part and how it's sold/price/etc? I think it's called a friction shoe, and I'd l ... (cont.)

5820170 is my lock number or latch I need to replace that and then I need to find out what kind of extruded aluminum I need to rebuild my outer door and I need new door handles for my double sliding door and I would like to get an external key lock for it

I need to replace my Pella screen door lock. Can you tell me the availability and cost?

I'm looking for replacement rollers for my sliding window. These have a metal body and plastic wheels. I think these are the original rollers from when the building was built in 1976. Couldn't find a brand name on the aluminum frame. The glass says Arm-r-clad EE Glass Lad. Looks like the rollers ... (cont.)