Viewing all customer Discussions for:

Other

One of the photos shows a symbol and part # 623. Do you know the manufacturer and are replacement plastic brackets available?Thanks,Larry

Hi: Looking for this bottom piece for our sliding door. We originally purchased closet doors from Sears Canada. We need two.

Looking to replace the lane parts on our old sliding glass doors. Not sure if that is possible.

The original window rails are stamped 26E I need 2 of these. My neighbor has a replacement stamped 265.0

One of my windows is missing what we believe is snap-in window glazing, which caused the glass to fall out of the frame. Having trouble finding it and wanted to confirm. Width is ~7/8" and depth is a little less than 3/8"

Would you have any replacements for these? This house was built in 1956. Thanks!

Hello I believe that this is the entry guard operator, but not entirely sure, the arm is roughly 9" however I measured to the sill so the 10 3/4" to the center could be correct. please let me know,

The window is about 21 years old. This roller is on the bottom of the window. Please let me know if you need anything else. Thank you.

hello, I have a set of windows that the mechanism doesnt work. A handy man told me to change only the mechanism and think i found it here, actually y ordered one from you to check it was order 1840772 Can you confirm what i ordered is correc, and this is able to fix my problem? Thanks, ... (cont.)

Need a 3 1/2' glass door glide and the space has to work on the wheels.

Hello, I have a casement window with a rusted hinge, so it will no longer close properly. The window was made by Peachtree in the late 80s - I have attached photos above that include one of the label and one of the original hinge on a different window that's still working properly. It looks like P ... (cont.)

Hello! I have one window in my home that doesn't have a full latch installed (and maybe never did). Based on the photos/measurements of a complete window latch (another window in my home, also Jeld-Wen), I was hoping you could point me to the correct kind of lock? I was thinking this looked close: ... (cont.)

On the bottom of our sliding mirror door are two roller assemblies each identified with the number 50121. It appears your part number 23-225 is the equivalent assembly unit. Before purchasing and shipping four of these units to Ontario Canada, could you please confirm your part is the correct repla ... (cont.)

These are door handles to sliding glass patio doors in our home, built in 1976. We are missing three (3) handles. However there are no part numbers or any manufacturer name on the pieces I have. The home is part of a gated community wherein all the homes were built at the same time, in the greate ... (cont.)

the push arm clicks into a rectangular slot. The push arm looks like an up and down staircase

I don't know the manufacturer of the rails but have been using Richelieu plastic brackets that are too small and constantly break. I need at least a 1" slot to fit the rail. Mounted against the back. If you have them, I would like to get about 10 pairs. Please let me know if you have something to re ... (cont.)

35 yr old replacement windows, "UNIFRAME" on the lock mechanism. Need three sets of slide and handle. Hope you can help.

I'm looking to see what size product you would recommend from your site to replace this one that is broken. It seems to be about six inches from top to bottom, and the socket that receives the rail/track for the slide is 1.25" on the outside - so I am guessing that the inside may be 1". These cabi ... (cont.)

Looking for some of these surface mount tilt latches. Window has block and tackle style channel balances. Window appears to be a kinko.

Hello, I have a Jen weld crank window. My son tried to open when locked and the male portion of crank broke off. I am looking for parts to fix with a new crank handle. Pictures attached. Please let me know if you can help me? We are unable to open window with this part broken.