Viewing all customer Discussions for:

Other

25 & 5/8ths inches for metal channel length. The stamp is shown on the attached pictures. but what I can read says: 25 9 B.S.I PB. These channels are original with the house, built in 2005. I have many that need replacing. I'd like to order 12 for now and will most likely order more if they work wel ... (cont.)

I am looking to replace the cam pivots in my 25 windows. I purchased one set of 26-150 : Cam Pivot Pair in the metal material but as you can see from my photo, mine are made of Nylon. They are otherwise identical. Would I have any concerns replacing them given the material difference? Thank you, ... (cont.)

Best I can tell, looks like a 26-408, but not sure and hate order to find out they are wrong. Seem to work differently, needed to remove as an assembly vs removing tilt leaver and then remove the latch and spring. Appear too large to be a 26-266 or 267 at ~2.75" long.

I have 1/2inch wide, 30 inch long springs for single hung, non-tilt windows. For some reason the springs have been breaking though the sash cap. I'd like help finding the right spring and sash caps, and some ideas about why that would happen in the first place. There is no stamping on the springs ... (cont.)

I need 24 of these set up like this please.

I need two new glides for a window. the track says 25-4 BSI the other number on one of the parts is 6598264 the part that is broken is the string and the clip.

Can you please forward me the items number or the attach picture? Thank you so much!!

I am looking to replace the operators on my awning windows. What was originally installed was a "lever" type operator, not a crank. Can you identify this?

This is a unigrass 6600 drawer socket. Need replacements and can't seem to find.

the support underneath is unseen the wheel itself maybe 3/4

Hi, I am looking for the correct top sash guide pairs. These look to be directional. My channel balance is stamped 1640 and measures 17" metal to metal. I think they are S390-17. Do I measure the shoe straight across or do I follow the curve which would make the measurement longer? Thanks Alot! ... (cont.)

Marking is 2630 BS MK. The channel length is 27". Channel width is 1/2" (9/16). Channel depth is 5/8". Both top and bottom guildes are winged.

Need 2 replacement rollers please see photos

23", d 2230 , maybe in the 1983 when the house was built 2 counts for one window

We need to replace this patio door handle and we and looking for a supplier.

I didn't see a model number on the hardware. The Furniture is the Villa Soliel Collection and the Bedside Chest Model Number 40611-111

I cant find this piece on your website ciuld you pleaselet me know if this is somethingthat you guys have or can make

Hi, I have 7 windows in my house that do not stay open. The house is 24 years old. Only one balance is still together. I took it out of window, see attached photos. The only marks on it is "PAT. PEND." Top to bottom it is almost 29" and the part that was attached to the window is 1 3/8" wide. The wi ... (cont.)

The Pella Serial Number: Imperv sliding dr-M0310431878-NFRC JAN20 2008 11 I would like to replace the entire assembly, including the lock. I thought the 82-086 would work but I'm not sure, hence, "Ask the expert!" Thank you!

4 Window Bow Window, L & R are casements. Unable to ID the Manufacture, No remaining stickers. Installed approximately 1987.Pictures are from the R/H operable working window. L/H Hinge has broken & missing parts & screws and does not operate or close properly. Due to weather condition ... (cont.)