Viewing all customer Discussions for:

Other

This part is from a Pella sliding screen door. Part says patent pending

Need to replace the window crank and mechanism. See picture

I am looking for this window is certaiteed

I need to replace these window balancers. I need:(6) with the numbers 28 5 inscribed, 29"(4) with the numbers 28 3 inscribed, 29"(2) with the numbers 22 3 inscribed, 23"All of them have the same end piecesThanks for the helpGreg

I am trying to replace broken kitchen cabinet hinges. They don't have to be soft close.

I need five of these. They have all broken off because they are plastic. If you have any thing stronger that would be great but anything will do. The screw holes centers are 3 1/4 ".

I need two bronze covers and cranks as well as two bronze locking handles to replace white ones. The window is a double Marvin casement and aprox 10 years old. Screen says A-X7164R but can't find any other markings/stickers. Thank you.

Mortice hole in door is 4-3/4 tall x 5/8 wide x 1-1/2 deep. No visible part # to reference on lock.

I need to upgrade and replace the old Anderson cranks with nesting cranks in bronze. The dimensions are 5 1/4" width and 1" height and the crank length is 3 1/2". No visible screws.

Hi, I have a window which is missing a black slider (or guide? Not sure about the name) like the one shown in the photo. Do you have it? Please let me know. Thank you! Anna

I need replace handle where can I find it? Thank you

Sir - I have a problem with my sash windows in that the counter balance coils have broken. Please see photographs of the coils with the figure 8 imprinted. Is it neccessary to measure the length also or are these a standard length? Thank You for your help. Kevin

Need to replace these but don't understand how to order your products with the different part numbers and ends. Any help would be greatly appreciated.

These parts date to between 1974 and 1978. There are no names, numbers or markings visible. A gentleman will be doing the repair and installation for me. Thank you!

D69669 Just wondering if you a chance to take a look parts pictures I sent you to figure out which model I have, I think I have the S 395 ? can you check out the channel balance 29 inches the sash is 22.1 lbs thanksTom

Hello,Take a look and compare the specifications of the 39-329 and 39-330 Roto operators to your assembly. Thanks for posting!

30" long 1/2 " wide Numbers 2930 stamped on rail . They are Dixie windows

This is an older lower cabinet with slide out shelf. The brackets that attach to back of cupboard are broken.

I own a home that was built in 1950 which has casement windows looking for the locking handle or latch. It has mounting holes spaced at 2 -5/8 and a 1/2" latch opening.

Please help me to identify the part. Thanks