Viewing all customer Discussions for:

Other

Need hinge arms and tracks as mine are rusted out.

Hello Swisco, I have a non-tilt single sash window which needs new channel balances. It is 22" long and from the pictures you'll see that the upper end has wings while the lower one does not. I thought I found a replacement from your parts but for one thing. The marking on the broken balance says "2 ... (cont.)

I posted the manufacturer of the glass but from your site I do not see a similar roller.

I need to order the following. See attached photos: Balance Stop -Qty 4 Window latch - Qty 1 22-1/2" Spring Balance - Qty 2 Thank you!

Dear Swisco, I am missing Anderson window latches and am wondering if you would have the parts. Attached is a picture of a latch and a picture that sadly needs a latch. Please let me know if you have the parts. Many thanks. Sue

I've replaced window operator already with a purchase from Swisco now I wanted to replace hinges but am not exactly sure what I am looking for. If you could help me identify what part numbers I need it would be greatly appreciated

I do not have a post

need replacement for balance with 30"sleeve with 1/2' "U" channel

I believe this is a blum, concealed aluminum frame hinge. I need 2 plus the mounting plates. Hinge # 71B950A- Mount Plate-20K4101A. If I can't get 2, I'll take 1.

What supplies could I use to replace these parts they are the parts from the bottom of the dresser drawer.

Hi Swisco - I am looking for the interior lock paddle and the exterior lock for this Novatech door. Is it possible to get the lock paddle assembly and exterior locking mechanism without buying the whole handle assembly? Not the outside handle has no hole in it, i am assuming i would need to drill ... (cont.)

My window latch mechanism quit working and I am hoping it makes sense to just replace the part, if available. I took measurements as seen in the photo above, but can take any photo needed to help identify the specific part, thanks!

My window crank mechanism quit working and I am hoping it makes sense to just replace the part, if available. I took measurements as seen in the photo above, but can take any photo needed to help identify the specific part, thanks!

Length of metal: 22 15/16that bottom stamped into metal: B.S. I. and the #2240I need to replace both balances, so need to purchase 2 balances once you identify the partthank you for your guidance. It was impossible for me to accurately identify which part was mine.

Didn't know i had a broken window latch until I noticed all the dirt on the window edges. can you tell me what i need?

The aluminum rod is 27" long. The only mark is 26 5 DV CMC 7 as shown in one of the images. Thanks in advance.

Only mark I see is the number 031 stamped on the inside of the metal. All the springs are broken inside due to age. There are a total of 10 doors in this old farmhouse.

I am looking for replacement window balance but am having issues as they do not come complete, having to order the end pieces separately is causing some issues. How do I make sure that I am ordering the correct parts?

Truth Window Lock / Entry Gard is wrong size (too thick) need 90-161 with narrow keeper and 2 1/16 spacing. I already ordered and tried 90-077C and 90-279 and they were too thick so I think I need the 90-161

coil # 9 B J PIN # 8 shoe # 6 Jeld Wen visions 2500 38x56 1/2 sequence 811 Batch 17308 date 3/6/2014