Viewing all customer Discussions for:

Other

These screen are wood framed and installed in the interior side of older Pella awning windows. I have not come across anything similar so far. Not sure how old the windows are but the house was built in the 1960s. Thanks for any help you can provide.

I have a sliding door that has handles on both sides. One of the doors have a missing handle. I need to get a dark brown handle or I will have to replace both sides.

The screw holes are 2 in apart and the whole part is 3 in long . Cindy

Can you help me identify these clips? This windows were installed by Home Depot . These clips are for the internal screens. I have four screens with four clips per screen

I need 3 of these. 2 5/8" long by 5/16" wide with 2 - 5/32" holes This is email 1 of 2 with more photos.

I just sent you an email and then realized I can send pictures, so here they go, let me know if this matches your part #82-243

Hi,The part I have is 1.5 inches high, .5 in depth. Couldn't find one on your site, maybe the 15-216Pls advise.Thanks,John

need 8 left 8 right

Metal retainer (as pictured) broke) on left and right sides of window. Trying to determine which part(s) to replace.

American signature drawer pull for dresser

Can you help identify this roller? The tension bar is 5/16" wide and about 4" long, the wheel is 1" diam.

this is a picture of the back of the kitchen drawer. This plastic bracket is stapled and screwed on to the back outside of drawer. There is a wooden glide above the drawer that the bracket slides on. Do you have a bracket that would be a replacement for this? These cabinets are 45 years old. Thank ... (cont.)

This is the part that prevents the window from fully opening.

This is the off bottom of the window that slides into the cam in the track. This piece broke off and the remainder is in the window. It looks similar to a 3" one you have posted but the "T" portion is not slanted like the one shown.This is off a Discount Building Supply MASTDH 23 3/4 x 37 1/2 whit ... (cont.)

I am looking for this casement hinge. It has 7D704 stamped on one arm from Truth. The arm that goes to the stud is longer than most I am finding on the site. The wind caught this one and bent things up a little so I need to replace. Any help is appreciated!

The right hand tilt latch is broken on one of my windows. I'm not sure how to remove it to send a picture of that, I need to see what the replacement looks like to know what I need to release to get the old latch out. I've attached 4 pictures: 1 - is the latch showing what is broken. 2 - shows the l ... (cont.)

Is the 5/8" inside guide measurement?

Stamps: (F9970A-8) & (A)

Need 2 balance The metal part measures 37 inches 36-15 LA5 CMC (36-HP49-51)

Need to two of these Need to understand which one to order. Total Channel length excluding Plastic ends is 28"