Viewing all customer Discussions for:

Other

I have s D-H window with all four window supports having broken shoes. Looks like age fatique. They broke when the windows were tilted inward activating the cam lock. I do not see replacement parts on the web site but part 15-180 has the same dimensions except the height is 1.5" instead of 2". I ... (cont.)

The windows on the home I purchased do not have weep hole covers. Is it as simple as measuring the height and width of the hole and finding a cover that works. Your thoughts on this are greatly appreciated.

I need 6 new Channel Balance devices to replace my existing devices.Attached are photos of the top and bottom plastic shoes along with with length measurements and "stamped code (3030).Also included is a photo of the top sash guide which I believe is 5/8" (your part # 18-008) I need (6) of these gu ... (cont.)

Hi - see attached photos. Appears to be a Caldwell with marking 24 4 JK CALDWELL It is 1/2" width (per your instructions) Metal portion length is 24 and 7/8ths inches Neither plastic end has a wing (you'll probably notice one is cracked) Can you recommend the right replacement? Thanks! ... (cont.)

Hi There, I am in need of replacement window corners for my 1998 home. I have attached pictures. Can you please let me know which window corners that I should order. Thank you!

On the handle it has the following markings. Canadian Patent No 919213 Patented 1975 Pat No. 3596954 I am trying to get it replaced and not having any luck.

It's a ply gem sliding patio door handle. I can't find where to buy this anywhere. I just need the lever itself for the outside (so opposite of this photo). https://www.plygem.com/windows-doors/brands/ply-gem/doors/200-series-patio-doors/

Part number? 6216#23885. Window is 32 7/16 w by 15 15/16 h. Which balancer should I get?

Hi. I am searching for this hinge. 652.338.55.00 as well.

Can you help me identify and locate this weather strip? It's for an older Pozzi sliding door. This runs down the jamb of the door. A felt brush like thing slides into the grove.

Spiral balance tilt out window. Spring not broken but rod came loose from spring. What holds rod to spring? Do I need to buy a whole new spiral balance

To whom it may concernPlastic brackets PGTRecently placed an order with you for 12 balance rods I need additional plastic hardware for six PGT windowsAttached you'll see photographs of the part that I need I'll take Qty 14 if you haveMeasure 2" tall 5/8 deep when laying flat longest side down from ... (cont.)

Would like to find and buy a sliding screen door lock (white or black plastic)- house was build in 2008

Hello, I would like to know if you sell or can direct me where to find this part I need. This is an Ultracraft no handle slide draw. I need the plastic white circle piece that fits in the circle of the draw. Please advise. Thanks in advance.

The one pic on table is the broken one off the housing!

Home built in 1990's. No serial number or manufacturer information on the windows. All of the Tilt Latches have broken. They measure 3-1/2" long x 7/8" wide. 5/16" high. Space from screw to screw is 2-5/8". I really need to replace these or I have to replace all of my windows. Hope you can help! Ha ... (cont.)

Hi...please please tell me that I can order the pivot pin or whatever it's called in the pictures. The closet is probably from 1974 and one door is missing the pin I attached in the pictures. Please help! Thanks.

Hi, Both of the balances on my window failed and I'm looking for replacements. And want to make sure I get the right stuff. Balance stamped with 26DS 33. Not shown well in the pics, but it has a pulley system and a heavy spring. Please let me know if you need any more info. Thanks! ... (cont.)

Broken window balancer, non tilt window, track channel. Stamped number: 86 26-4 DC5 CMC 45

We purchased this dresser and one of the drawers is missing the slides. One picture shows the orange slide from another drawer and the other one shows the drawer missing the slide. Any help will be appreciated.