Viewing all customer Discussions for:

Other

I have refurbished a Fenestra by Detroit metal frame window. I am looking for brass screw and metal piece that holds the screen in place. Looking for 11 of them. Are you able to assist me.

We need the hook and the locks it goes on the left side of the window. Cant seem to find it on the website.

The piece that is broken is a slide socket with an opening of 1 1/2 inches. I have found multiple slide sockets that have an opening of 7/8 inches.

The handle keeps turning and not Opening the window. Once I push the window it open and I can close but when I want to open it's just turning. Can I fix it ?

This hardware has two springs on each side These are larmco replacement windows that were put in about 20 years ago and I'm going to need several of these

No number found

Looking for a few pairs of these latches (left and right handed). Unsure as to the window manufacturer nor am I aware of the year of manufacturing. Would be interested in up to 5 pairs possibly. it appears that there was a bottom plate that broke off and is still in the window. It appears to be remo ... (cont.)

I am trying to identify the attached window stop. Can you help? If you do carry this I would need pricing and availability. The overall width is 1" the top width is 1/2" the depth is 1/4" Thank you

Hey, I have a window in which both right and left pivot bars broke off the bottom window sash. Attached is a photo of a salvage part...(tenant says it's all she could find...result of break in).

Tim, Here is a picture of the hardware, the house went thru a flood. The doors are still in good shape, but when they tore out the floors & walls the threw out the tracks. Pat Sequin Lumber

I called about needing help and was asked to provide photos of the parts I'm seeking which I provide here. 5- sash locks (attached photos with measurements): Center from hole to hole= 1-1/4". Sash riser height is 3/8". Sash latch height is 1" 3- 17" 1640 rated window balancer spring assemblies ... (cont.)

Hi, Do you carry a sliding door porch lock similar to the photo attached? -- D&S Contracting Services

Looking for replacement for this shower door guide - one side of guide has cracked off

Is there a replacement for this Atrium window wheel?

Right hand window crank. bottom holes are level and are 1 1/8th" apart (however when I measure the left side, they appear to be 7/8th" apart. height is 5 1/4". This is a PGT window.

Name says capitol

This is weather stripping for some wooden french doors. It slides in as opposed to the newer push in style.

Has "7"stamped on the coil. About 1 1/4" wide.About 1/2" deep. The coil broke .I want to replace all pieces , left and right, Please let me know. Thanks , Joe

Looking to replace several glides/hardware for Scheirich, circa. 1988. Drawer mounted hardware is 21 5/8". Back piece (ppw097) appears intact. Thanks.

My windows a rivco. Im guess single point lock. I need to replace the crank the window does not close all the way. I couldn't find a part number on operator