Viewing all customer Discussions for:

Other

I have multiple doors in a home they need replacement parts. The brand on the is CES. The sliding glass door with the 3 point multi lock is a priority.

Hello i would like to know if this parts can be replaced on my windows. After 10 years they don't stay open. Any advise for replacement part or do Ii have to get them service. The inside measurements are 33 1/2 wide x 44 1/2 height (half windwow is 23 H) Your advise would be appreciated, CIndy ... (cont.)

Hello: Our front Entry Door has gradually developed a space between the door sweep and door threshold. Our current sweep measures 42 inches long and 1 & 13/16 inches wide. Our current threshold is 5+ inches wide and 41 & 1/2 inches long between the door jambs although the space in front of the doo ... (cont.)

I need the right side counter weight assembly. I also need to find both top tilt switches.

The window feels like it's going to fall out as soon as I start cranking because the anchor point at the outside of the window is out of the track. This window is a good 20 feet off the ground so it's difficult to handle from the inside. Can I crank it all the way out to get that piece in there, o ... (cont.)

Hello Swisco,I'm trying to get the correct balances (2) for my old Viking Sash Window. I don't have the old ones. The slot width for the balance is shown in the picture measures 5/8". The distance vertically along the slot measures almost 24-3/4" as measured from the tip of the angled plastic hard ... (cont.)

This is a corner cabinet hinges from a Wellborn cabinet. I am guessing 170 degrees.

We need the Right hand version in WHITE or the Casement Window Operator 9 inch H-3524

I need the left and right pivot bars for the lower sash. I hope the pictures help.

27" 9/16 x 9/16 aluminum u chanel and believe top is 19-002 and shoe is 15-050 Weight is 2640 can you provide me a part number?

The bottom lock is broken and the window won't lock properly. 43L3 on one side and 7772 on the other. Cheers JF

The window will not stay open and it looks like the tension band (looks like rubber, I don't see a coil spring) is disconnected from the pivot shoe. I would like to know what replacement part this would be and how to repair it. We know how to get this out, we just aren't sure what we need to replace ... (cont.)

Please help me locate this part lock that has been broken from our patio door. On the back it has the numbers: S2573553 W2573554 I25B-3 Thank you!

Bottom shoe is exactly 7/8" deep

I have a pella exterior door that the 3 point lock mechanism won't work. I took it apart and it's something internal to the latch/lock mechanism. Do you have replacements?

Hello , I think I have Lockwood windows and the end on the spring which holds the window so it can be counter balanced have broken . Would you have a replacement part ? Thank you. Kim Jow

bulb style 1/4" bulb weatherstrip for Wellington Casement window frame

Hi looking for this wheel and hardware to replace for a slider.

I have a double casement window WS IGCC CBA 03/IGMAC WS MEDThe crank is stripped and the window won't close all the way.Do you have the replacement part?

Pictures of ends attached. FYI, I did weigh the windows and they're 20lbs.