Viewing all customer Discussions for:

Other

Hi,I have two 20 year old Scan Furniture Chester Drawers that need new ball bearing sliders.The original drawer hardware is approximate 12 1/8 inches or 31 cm long and 1 inch wide.The unique feature are the two pegs that attached to the drawer; one in the back of the drawer as well as one beneath th ... (cont.)

I am looking for 1 pull to match this one. The Haas cabinets were put in our house 50 years ago and are still in very good condition. We want to keep the cabinets in place but need just one pull to restore them fully.

Hello. We just bought a new home, and our old Anderson sliding doors could use some upgrading. All the plastic stripping in torn and on the outside of the doors the stripping is misshapen and could be replaced if possible. Also we need new door pulls and the door is hard to open. Do we need new whee ... (cont.)

I am look for something similar to this. 8.5"-9" shaft. And a compatible handle. Also look for the lock handles as well. Thanks for your time, I look forward to hearing back from you

Dimensions: 2-3/4 long, 1-3/8 tall, 11/16 wide, 1-1/4 wheel

I had to break in because I locked myself out. Pried the window open and now can't close all the way.

I talked to someone earlier this morning but have had trouble getting the photo to this post but here it is I think. The picture is of the 34HD The windows were ordered in 1987 I need to replace following balances: (2) 34HD TS8 (2) 36HD TS8

Hello. Pictures are above and I am in need of a top pivot that matches the one that is broken/missing parts. Hopefully you can lead me the right direction. Thanks, Dimitri

I am unable to find this part. Thanks

Hello! This is the hardware on the top of a wooden sliding door. Can you help me identify it and find a place to supply a replacement? Thanks for your help!

We have numerous aluminum replacement windows in our house, many of which require replacement of the vinyl (PVC?) strips that run within aluminum channels between the sashes, as shown in the photos. These windows were installed by the prior owner of the house, so we do not know product info or when ... (cont.)

The locking mechanism looks like simonton based on part number 90-077C. I also need two pivot bars pictured. I've searched your catalog and couldn't match up perfectly. Any help is greatly appreciated

Are replacements for these foot bolt catches available?These are from Pella Architect series patio sliding glass doors.

hello, I have a 4/0x5/0 Milgard single hung vinyl window with a balancer stamped 26-5 ED5 CMC 68. can you recommend a replacement? Thank you -Sean

These are MW Vinyl, singlehung windows approx 15-20 years old. The balances are all bad in 2 window units. Balances are 25.25" total length and approx 24" if you omit the shoe pivot from that. There is no metal channel, just the spring approx 12" from end of hook to end of hook and a plastic or co ... (cont.)

Any inventory matching these specifications? Thanks.

Good morning, I have a double hung window that will not stay up. Windows install 2004. Coil spring has broken it's 1/2" wide. And appears to be the only problem, I may be interested in the whole assembly. Thanks,

Hi, I need three stud brackets for a double arm crank operator. I think they are Pella windows but I'm not sure. I can't find any names or numbers. I also need 5 of the sliding clips for connecting to the arms.Thanks, and let me know if you need other information......Lee

I need to order 2 window cranks that would fit my 20+ year old Casement Pozzi windows. Please advise and thank you so much for your time and effort regarding this matter.

I am searching for a replacement handle for a patio sliding door. The original door handle was removed to install a pet door and, years later can not be found. I could not find any manufacturer info or part numer on the door.There are six holes in the door. The two larger center holes are roughly ... (cont.)