Viewing all customer Discussions for:

Other

This is the inside door handle that appears to be made from aluminum it has a 5-1/8" mounting distance. The latch handle is 2-5/8" from the mounting hole which is centered between the mounting bolts

Here's the broken shoe along with tag on window. Hopefully you can help me out. Thanks Richard

Hi. I'm looking for replacement operator. The only part number I found was 20810. Thanks!!

The small metal clip shown in picture (attached to role) cracked in half. Need to replace it.

I am trying to rescreen the window screens on my house. My neighbor has the same windows and recommended your company. I found what i think is the correct corner with the pull tab (SCREEN CORNER LATCH WITH PULL, 7/8" X 5/16" Product Code: 95-218), but I couldn't find the bottom corner pieces with th ... (cont.)

Hello, this item arrived, and unfortunately it is not the right part. It is just a little bit thicker than the original and does not fit into the channel. I've attached a few pictures. The original is about 3/8in thick and the new one is 1/2in thick. (The original is shorter overall because the ... (cont.)

I would like to replace the cranks that attach to the window arms

Hello, I am renovating a house down in Florida and am trying to make sure I get the correct parts for these window cranks which I would prefer to keep since they seem to work OK (though they have not been maintained). The link arm is 2 1/2" and the operator itself is 1 3/4" wide at the base and app ... (cont.)

i need 10pc roller tilt constant force 96cr balance cam # 7

I work for a contractor who is looking to purchase 2 balances for this window

I need the black sliders that open and close the window

I have a small casement window. The crank is broken. The pictures show all the numbers. The crank is on the left side. Do you have the part(s) that I need? Also. I'm somewhat handy for a woman. Would I be able to fix it?Thank you,Denise

both cranks have failed. crank handles are stamped 'semco' inside plastic cover of handle is stamped 'TRUTH' with home icon gear box in window that I can see stamped 'Made in U.S.A. ' notsure how I get at removing gear box? any tips?

I'd like to replace all locking terminal or shoe with a new one. The only numbers that I found on these old shoes were 8 and 7R.

Talked with Tim on Friday four each right and left hinges and cranks

Windstorm damaged another window with same parts as shown in picture

This match is on a Weathervane window manufactured probably 1987. Can't seem to locate it. Do you have one

My windows came from 84 lumber in 1998/99. I need to replace the window latches. They are spring loaded. Cannot find any info on them.

Do you have this unit in bronze I believe. The holes are 5 1/4 apart.The 2 holes near each other are 1 1/4The attachment arm is 2 1/4 apartThe hole in the arm is 1/4" threadedThanks

My channel balances are marked as shown in photo. However, the metal-only length measures 28". The overall length, including the top guide & shoe is 29". It seems my channel balances match your Series 351 in every way. But is the Series 351 metal-only length 30", or 28" like mine? Please advise so ... (cont.)