Viewing all customer Discussions for:

Other

Hi. I need 4 coil balances and shoes for my double hung windows. The sash weighs 22 pounds. I can't find a marking that tells me what manufacturer I have. Not sure how to figure out what exactly to order. Thanks for your help.

Trying to identify the weatherstripping part. bottom t bulb is 1/8th inch diameter of bulb is about 1/4th inch bulb to the t shaped bottom is 1/8th inch

13. 2.

No markings present. Metal clip and nylon fittings shown in the pictures are damaged. Length of the channel portion of that balance is 29"

several windows have bad hardware . the large spiral screw keeps coming out of the seat need help identifying the part

I'm looking to replace the handle on our sliding glass door. It was manufactured in 2008 by Patriot Manufacturing. I believe the model is P57SPDR. Attached is a picture of the specifications of the door.

Hello, Lost our house in recent fires. Bought another 1940 built house. All window operators are of this type. What make are they? Are there replacements?

I need this upper hinge. The arm is approximately 5 inches. Do you know what part number this is?

2 9/16 long. 1 inch wide. 1.5 inches between screws.

Safety latch

Interior storm door handle/lock integrated

Moved into home that has many older replacement windows. Cannot find any identifying marks, numbers or names on the windows. As we started to clean them we noticed some pivot bars were broken off at the end. The bar is 2.25" long and the base is 3/4 " wide. The hook is about 3/4 in long. ... (cont.)

need part number for Caradco window that opens to the right that we replaced in August 2018

House was built in 1996 or 1997. I need to identify the lock in the pictures which needs to be replaced. Do you have either an exact match or your equivalent?

Hi! I have a Guardian storm door that was given to me due to my old one was broken and unfixable. Everything is good except the handle and lock mechanism. so my research led here! I measured the components and the 40-222 seems correct. Before I order I just want to make sure.

We recently moved into a 1910 home with a 1988 addition that has HURD casement windows. At the moment, we only have one crank handle that we need to move around to operate four windows: Two windows with openings measuring 1'8 ½" x 2'7 ½" Two windows with openings measuring 2'5" x 5 ... (cont.)

Body 2 5/16" long x 11/16" wide x 3/8" thick

Hi there, was hoping to see if you have a cross reference for this operator from Del Mar windows

Need a replacement part and directions

Window balance for Pella window at Lowe's