Viewing all customer Discussions for:

Other

The windows say thermoguard Season-All

Product code 26353 is this the same item since my existing components are offset Center which would mean a left and right

The wife snapped the Pivot bars (26-226) which I just replaced after your quick order turnaround on the inside window sash. The outer sash on left side appears to have a broken or detached spring as pictured. Do you have replacement parts I will need? How do I access the spring mechanism to repla ... (cont.)

Can't locate. Appears to be 3/8 thick, 5/8" wide and 2-1/4" tall

I found everything else I needed to order but this, surface mounted latch for tilt window! Hope you have this part. Thank you! Joe

Weatherstripping for Hurd windows in the color sandstone. House was built in 1997.William

looking for this roller. The manufacturer says they sent all of their rollers to Swisco.

I NEED TO REPLACE 4 SHOES AND FOUR CHANNEL BALANCES. THE SHOES I HAVE ARE AN OLDER VERSION WITH A DEEP GROOVE ON THE FRONT SIDE AND I AM ONLY LEARNING THAT THROUGH OTHER INFO I HAVE SEEN WITH PEOPLE ASKING QUESTIONS AND YOUR RESPONSES. IT LOOKS LIKE I WOULD BE THE 795 SERIES. JUST NOT SURE WHICH ... (cont.)

Looking for plastic piece that holds latch bar on Certianteed window.

Assisting a friend. When she closes her sliding glass door from the outside, the locking hardware drops into the locked position; thus preventing her from accessing her house through the sliding door. She is locked outside. I dismantled the hardware. Printed on the inside hardware is the followi ... (cont.)

I believe this is a safety feature . If pressed in and properly functioning the window can be raised. Those that are broken must be "held" in to raise the window. Those that are broken remain sticking out.

1990 alpine #2056-2LR wood casement window seals thank you bill

Kennatrack series 400 part Looking for this part to replace existing system

Hi, looking for a missing piece on my window. When you slide the button the shash tilts out. It goes on the right side of the window. I sent pictures of the left one. Thanks for your help!!

On glass it says king tempered glassANSI Z 97.1-1984. 16 CFR 1201C11CAN\CGSB-12.1-M

Springs disconnected from runner. Window model appears to be 5900. I can faintly see two coils in the white cap.

I need to replace this part. It's 16 in long and the markings say 1607 bsi

I have a Millard sliding door on in law entry and I want to install a keyed entry to the sliding door as it serves as a front door entry. It has a single latch hook system and someone converted it with a black outside replacement I would like the lock to match the white vinyl frame for the Millar ... (cont.)

Can you provide two replacement window balance springs to replace the one shown in the photos? It is marked "25-4 Caldwell J". The pulley mechanism broke on this one and I should probably replace both sides to keep the window balanced.Thank you,David

Attached is a (poor) photo of the muntin bar. It is 3/4" wide by 9/32" thick. I think your 55-182 is the proper clip. Please confirm. The existing plastic clips are so brittle that they crumble when you touch them after 18 years in the FL sun. The windows might be Alcan as your sliding glass door ar ... (cont.)