Viewing all customer Discussions for:

Other

I'm looking for something that will cover track only on patio door

The handle is broken that locks thd door. Not sure if I need the entire lock or the lock handle.

From the window closed the spring is 55 inches but open 27 inches I need 6 of these springs please help me.

Yup dash guides are broke hope the measurements work. 1¾ in overall, 5/8 in wide

14 inch channel

I need this balancer please

Hi, Not sure about coil and pivot shoe needed here. Label not to helpful to me. This is a small bathroom window and a coil on one side broken. Thank for your help, Craig

Hi there, I have a crank sleeve that has one side broken. I'd like to either find a 1:1 replacement for that part (the crank arm is fine), or something suitable to replace the entire mechanism. Thanks for your help, Adam

1.75x 1.5 with 1 inch between hole center.

can someone please help me identify the name/part number? At this stage, does the whole spring unit need to be replaced, or does this little plastic cracked piece usually resolve the issue?could i have part number for both?thank you

All our Harvey windows from about 2000 have had the cam in the pivot lock shoe break we don't want to replace all these windows but windows won't open properly and or slam shut if you try to unlock and lift : hoping to try and replace these ourselves or using local handiman

Please review the attached Photo & advise on the correct replacement part.With no cut outs for replacement - it would appear That I would also need sash spreading tools. Please confirm & mave a reccomendation. Thank youJared Last year I purchasaed some Pivot Bars - those worked well so I ... (cont.)

Our old model windows can't be closes tightly by the operator working. I need to replace this operator, but I couldn't find it at hardware stores. Do you have it in your store?

I'm trying to find a replacement part for the locking mechanism inside my sliding glass door. Picture included above.

I have one window that is completely separated from the mechanism on each side of the window that assists the window open and close smoothly. I'd like to replace the components that are on either side of the window. I uploaded a few pics of the parts that were visible. Not sure if there are addition ... (cont.)

I have a two-pane window above my kitchen sink that has a crank mechanism on each window. I would like to replace the two crank mechanisms. I uploaded some pictures.

Crank/gear window handle

Hello..wondering if you could assist with what part I should order from you.

Patio door handle maybe 7 in long each screw is 3 mm from the edge It has a slide in the back to open the clasp the clasp falls down on the frame I want a handle and I want to lock on the other side they can lock an open with a key.

Need replacement for this pivot, also there is no opening to remove it like you show on your videos