Viewing all customer Discussions for:

Other

What is the correct part # that I need to orde for this part

Good afternoon,In 2007 we purchased at Pinnacle Narrow Sliding glass door from Horner Millwork. The rollers for the door are failing and we need to replace them. The description for the door is 6068 Pinnacle Narrow Sldr; tan., LOE-Temp, XO. Pine, Pie Int., -9/26" w/ tan screen, black hardware.Your ... (cont.)

on hinge Blum 78M810-02.01 was between the two doors on an inside corner pie cut lazy susan cabinet. the part actually broken is the end of that hinge and is labeled 78.850-01.01

When I attempt to close window I end up with the handle and handle cover in my hand. It opens fine. Casement operator says Entry Gard Truth. Numbers on closer includes 20810 and 31538A. Can I just adjust it or do I need a new part. The handle cover is slightly cracked, but I don't need a new one ... (cont.)

Just need crank handles for windows in the building Hurd handle with 1008 on inside of the handle.Pricing per handle

These are windowmaster windows built around 1996. 1st photo has Id number. Need 4 pcs for 2 windows.

We had replacement vinyl windows installed in our duplex rental in 2008. Three of the locks are now missing the white plastic push button. The contractor(Coastline Remodeling, Santa Ana, CA) is no longer in business. We are in California. I don't know if they're Superior Windows, Atrium Windows or p ... (cont.)

Hi the old invoice says HVCMC7 and the metal strip without the white clips measures 20?. And the inside of the strip with pulley and spring in it looks like 1/2? Please tell me the replacement part number and cost per balance. Regards, Rob

2008 Country Manor, VIN: 1F910PU3581070384 Patio Door IPO Standard Option #32971 There are no markings on any of the latch and lock assembly parts. This is a vinyl clad thermopane Patio door assembly. The handle mounting plates are both cracked.

series:awning type:PRAW code:NVP-K-19 i'm looking to replace this part in my window thanx in advance

My snugger is stuck in the track, about in the middle of one of the 2 doors. So the left door opens about halfway and then can go no farther. What can I do? Thnx

Need 8 lock plates

Closet door top rollers on an 80s single wide mobile home

Can't find this hinge. Lots similar but with shorter shank (measure A)which doesn't work with my doors.

This is for Legance 3! The screen slides on a track,looks like there is a T guide guide that runs within the track.....My ?T? guide is broken and partially missing,need to replace it! Might you folks know what I am referring to?

You guys were so helpful in identifying which balancer I need. But there is another couple parts that are missing on several windows one is a plated steel clip up high that sits almost flush uup high but if you put fingernail under it will"click" out standing out no longer flush the other is a whi ... (cont.)

Stamping: 36 9 BA CMC 4 37" metal to metal. Need help on identifying the bottom guide.

Spec's: Fisher Window 1/2" by 29" balance 27 4 CV CMC 7 printed on the balance Window weighs 30# House built in 2002

replacing Pivot Lock Shoes that is broke an what is the easiest way getting Pivot Lock Shoes out a aluminum frame double pane fold out window thank you

Based on your channel balance stamp, you'll want to select spring strength option 2040. Two of those should be able to carry a 15 to 23 lb sash.