Viewing all customer Discussions for:

Other

My weather stripping measures about 9 mm across the foam diameter. The "extension" measures about 7 mm from the bubble to the tip of the extension, as suggested in your video. Your 58-171 measurements are taken from the diameter of the bubble, and the the width of the extension channell - rather ... (cont.)

Hi, I am looking for a replacement Window Dyad crank operator with a 5" hole center and a 4.5" arm. I ordered SWISCO product 39-090 which was much too large to close. I am returning them now. But before I reorder I was hoping for some confirmation on these two questions. 1. will SWISCO p/n 39 ... (cont.)

I have attached the following photographs to get help in identifying the replacement balances (springs/shoes/plastic rod) and tilt-in latches. The single-hung vinyl windows I have were installed by Pulte in 2000 in the Townhomes of Fredericksburg at 601 Old Hickory Boulevard in Brentwood, TN. I have ... (cont.)

Leigh Full-Vu metal bi-fold doors. Coopersville, Mi. I need 6 pivot pins, 6 guide pins w/ nylon caps, 10 springs, and 4 rubber stops. Thanks

I need 2 balances. Both for same window. Number on the body is 11600A-3. There are numbers on the mounting flange: 519 153 7 89. Both balances are numbered identical, both units are identical. Both have two springs; 1U, 1L each for each of the two sash cord pairs on resp sides. The window ... (cont.)

I also need to replace the Balancer in one of my andersen windows the marking on the box read as follows: 11600-17 D80 7/27 833 Which part should I order? Thanks. Tim

Old Anderson windows with the following stamping: EE 5 27 ( as far as I can tell What number Swisco?

Can you sell the keeper by itself ( thats the part that keeps on breaking. Repair kit (10-401

My home was built in 1990, and contains Weather Shield wood double-hung tilt windows. Several of the (upper) balance shoes have become brittle and broken (they are metal). Is there a suitable functional replacement part for these, as I expect they are no longer manufactured in their current form? ... (cont.)

My old andersen window balance numbers don't match anything you have listed. The numbers I find on the old balance are; J15 5423 385. I also see another number 11600-17. They are on the side with the pull ropes. On the other side there is a number 11600-3, there is also a date 1967 Can and the ... (cont.)

hi, I need to replace the pivot bar under the top sash. when i was taking it out i snapped off the pin. i believe its 4" in length and 1/4" in width is it part 26-218? thank you

Amco windows bottom sash pivot bar black 1 1/4" wide x 1 13/16" long with hole for screw (number stamped on bottom is 7073) We can send a sample or pictures if needed

Hi, I am looking for a lock that I can secure on my existing okna casement window to prevent my son from opening the window. Can you please advise on a product that works for this window ? Thanks in advance, Malar

the numbers on your replacement balances do not resemble the numbers on either the existing old balances or the numbers I have for new ones purchased somewhere? about a year ago..... these are the numbers I have, could you tell me would be the appropriate replacement? 637h24 0506 A ... (cont.)

Do you still carry part #26-293 right hand tilt latches? Thanks, Meri

Hello - I have two balances - 11600-17 - with the additional numbers S23 1027 7-8. What is your recommended replacement part for those, please? Thank you Frank K

My shoes look and measure the same but the width to the locking cam. Wausaw Window Company made the windows Thank you.

I need all four replacement parts. Balance block, Coil, Pin and latch in tan if you have it. Thanks Dwight

Parts that need to be replaced, both are from inside the top edge of the bottom single hung window. Part is 2 7/16 long, 5/8 wide. 3/8 thick first step, 5/8 at second step. Notch is 3/16 deep 5/16 long, Top is 1 3/16 X 5/8 X 1/16. Spur leg is 13/16 long at 9/16 it steps in 1/16 on each side ... (cont.)

I need help getting these replacement parts for our broken window sashes. the cams inside are shaped like a horseshoe and are broken to pieces.