Viewing all customer Discussions for:

Other

I'm looking for several pairs (i.e. L&R) metal drawer slide. These were used on wooden dresser drawers in cabinet made by Thomasville for military use in on post housing. Drawer slide is marked Made In Austria, Number: MR20314/400 On the drawer, slide is L shaped attaching on side and bottom edge ... (cont.)

distance between screws appears to be 1.5". This is on a condo built around 1980 if that helps. Thanks.

What is the difference between Series 380 and Series 385 specifically 15-005 and 15-004.

I need a C-9400A-1 straight arm left (i think). What part do you recommend?

Hello, I am looking for some white plastic plugs that go in the perimeter of the moulding around the glass on my entry doors, that covers up the screws on the interior side.These would be somewhat wedge shaped, as they are in the middle of the moulding. The name on the hinge is Penrod, and ... (cont.)

I have a 1980 or so glazing that you did not have. I was looking at your glazing and found the 55-092 , all most the same then your site shows my window and that this could possibly be a replacement for the original, and in just looking at it, I had to agree, so I order it. I install one with great ... (cont.)

Please hep me to select the correct latch part. a sketch and photo are attached. Thank you. W.B. Marked: AS NYC 40 39

small rollers for top and bottom of screen door with pull pins on screen frams

Having trouble finding the lock for our sliding glass doors.I went to 2 local lowes and 3 home depots and no one carries it.

Is this a parifin based product like Door Ease and can it be used for the same purposes?

Please let me know if your company has this screw available.

See attached Files

I'm looking for 4 green tip series 600 21" 5/8 spiral balance and 4 balance boots. Thank you!

Does the bottom of plastic holder "hook" on to the bottom of the fireplace mantel? The bottom looks like it's hanging freely in the air which I want, but I want to be sure before I order.

Will these work on a 4 inch thick wood mantel?

Here are two pictures of the top idler pin and the bottom outboard recessed caster i found the caster on your web site but can not find the top pin do you sell this part or have a kit with both bottom and top in it the door is a Kawneer slider thanks

Greetings. I am looking for a part the same size and shape as your part # 70-114. The difference is the screw end has a 1/2" barrel extension that secures a glass panel to the security door frame. Thanks for your help. Marcia

After going over the information on your site , I believe I have identified the balance that most closely matches the one I need to replace The pulley cord broke). However before ordering this item , I wanted confirmation that it was the proper one- it looks like a 385 series but I don't want to mak ... (cont.)

The balance is 28" long and 3/8 diameter The plastic pivot shoe is 7/8 wide and 1/2inch thick and inside diameter is 3/4 inch I have five vinyl clad windows and need 5 sets. One lumber supply company thinks these are Croft windows. The track home was build in 2003.

Do you have the interior and exterior door handle for this type of lock/latch? Mike