Viewing all customer Discussions for:

Other

This is a little plastic piece that the sash pivots in when tilting out for cleaning. My house is full of these windows, and a few have this same broken piece. Are you able to ID which window i have and what part to replace?

Spring and balance seperated. Need replacement (2) both sides of window.

Looking to replace several of these balances. Measurements in pictures. 3 1/8" long by 1 1/4" wide at widest part (tabs). 2 screws. Removable rubber piece at bottom. Need coils as well. Double hung windows. Sticker on window frame is in pictures.

Markings: C2, Ultra 15 Steel wheels 1.5 inches diameter Assembly body 3 inches length Assembly body 1 inch height Assembly body slightly over .5 inches wide

Do you carry these door slides?

Looking to replace coil balances fully not just the coil

Please help me indentify the tape balance in the pics. This is for replacing the coil in the balancer of a double pane window. 24"×16". Thank you.

is the inside of this part threaded and accept a machine serew

Not sure what exact size I need to get but was hoping you could help me. Thank you

Hello This is for Awning windows that are approx 35-36 years old. The glass measures 22'H x 27'W . There are 2 straight arms . 2 Arms per window.

Will u have this part by any chance

I'm looking for something that will cover track only on patio door

The handle is broken that locks thd door. Not sure if I need the entire lock or the lock handle.

From the window closed the spring is 55 inches but open 27 inches I need 6 of these springs please help me.

Yup dash guides are broke hope the measurements work. 1¾ in overall, 5/8 in wide

14 inch channel

I need this balancer please

Hi, Not sure about coil and pivot shoe needed here. Label not to helpful to me. This is a small bathroom window and a coil on one side broken. Thank for your help, Craig

Hi there, I have a crank sleeve that has one side broken. I'd like to either find a 1:1 replacement for that part (the crank arm is fine), or something suitable to replace the entire mechanism. Thanks for your help, Adam

1.75x 1.5 with 1 inch between hole center.