Viewing all customer Discussions for:

Other

Do you carry these door slides?

Looking to replace coil balances fully not just the coil

Please help me indentify the tape balance in the pics. This is for replacing the coil in the balancer of a double pane window. 24"×16". Thank you.

is the inside of this part threaded and accept a machine serew

Not sure what exact size I need to get but was hoping you could help me. Thank you

Hello This is for Awning windows that are approx 35-36 years old. The glass measures 22'H x 27'W . There are 2 straight arms . 2 Arms per window.

Will u have this part by any chance

I'm looking for something that will cover track only on patio door

The handle is broken that locks thd door. Not sure if I need the entire lock or the lock handle.

From the window closed the spring is 55 inches but open 27 inches I need 6 of these springs please help me.

Yup dash guides are broke hope the measurements work. 1¾ in overall, 5/8 in wide

14 inch channel

I need this balancer please

Hi, Not sure about coil and pivot shoe needed here. Label not to helpful to me. This is a small bathroom window and a coil on one side broken. Thank for your help, Craig

Hi there, I have a crank sleeve that has one side broken. I'd like to either find a 1:1 replacement for that part (the crank arm is fine), or something suitable to replace the entire mechanism. Thanks for your help, Adam

1.75x 1.5 with 1 inch between hole center.

can someone please help me identify the name/part number? At this stage, does the whole spring unit need to be replaced, or does this little plastic cracked piece usually resolve the issue?could i have part number for both?thank you

All our Harvey windows from about 2000 have had the cam in the pivot lock shoe break we don't want to replace all these windows but windows won't open properly and or slam shut if you try to unlock and lift : hoping to try and replace these ourselves or using local handiman

Please review the attached Photo & advise on the correct replacement part.With no cut outs for replacement - it would appear That I would also need sash spreading tools. Please confirm & mave a reccomendation. Thank youJared Last year I purchasaed some Pivot Bars - those worked well so I ... (cont.)

Our old model windows can't be closes tightly by the operator working. I need to replace this operator, but I couldn't find it at hardware stores. Do you have it in your store?