Viewing all customer Discussions for:

Other

Weather stripping from under a front entry door. 8mm kerf style insert, 5mm brush style sweep. 5mm cross section width of plastic insert. The door underside had two separate rows of this weatherstripping.

The end of the slide bulb broke off

Hello, can you custom make 2 of these?

Hello, I'm looking for replacement rollers for two different doors. Please see attached photos. Can you assist? Thank you!

Hi, I have Semco double hung windows, wood interior, clad exterior, built in 2008. I'm looking for the weatherstripping fuzz that's is mounted on the jamb liner. I see your site has different size weatherstripping and curious if you size it by manufacturer specs? Any help would be greatly appreciate ... (cont.)

Hello,I'm looking for a smart-lock solution (ALEXA, WIFI, BLUETOOTH, and/or ZWAVE etc...) for this style of lock from a Simonton Sliding Patio Door. Any suggestions?Thanks for your time,Jon

Giesse single arm with end pin that connects in the plastic slider on bottom of sash.

Hello, The channel metal to metal is 30" Please let me know what is swisco part number to order? Thank you Mike

Roller on the bottom of an aluminum sliding window. Single, flat, metal wheel. Window track depth is 3/8" and track width is 7/16". Groove width in the window track for the plastic roller part is 5/16". Entire roller part is 1 1/2" long, 5/16" wide and 7/16" high.

Is for a aluminum slider window it goes screwed on the side of the sash with two screws, the peace is 1 1/2 x 5/8

Hi. I have several windows in the house that have broken coil springs. The company that installed these windows call windows of the world are no longer in business. Can you help me find the correct replacement ?

Need to replace broken pulls from Lexington locker room furniture. They are 4-3/4" on center. Oak and antique brass. Inside round piece is B483-1-2. When uninstalled, the pullscan measure as small as 4-1/2" on center, but the actual holes in the furniture are 4-3/4"

I need 3 tracks for 3 pvc Louver doors. They're metal tracks and also need the plastic covers

Window cranks are old they are about 7 1/2 inches long the long arm the short arm is independent of the long arm I believe it is truth hardware and she wants to replace it with something more modern. She wants the white housing with white cover and how the crank arm folds into the cover I believe th ... (cont.)

Aama certification 5700 need replacement rollers .

This is the strip between the doors and we can't find anything matching on your site.

18" long Stamps on it: 1715 njbsi

I'm looking for this Viking window glazing bead. I understand that you might be able to locate or possibly have some

Greetings, I want to find out if you have the following snap-in glazing beads available. There are two glazing bead designs used in my window, one for the Horizontal dimension and a different design for the Vertical dimension. I am sending you separate emails for each bead design along with attached ... (cont.)

Hello i spoke on the phone with the customer support. I am looking for a vertical slider mechanism for the window. See the attach photo i have uploaded. I can't seem to find the right one, if it's possible to help me find out the right one. Thank you.