Viewing all customer Discussions for:

Other

Could someone help me identify which part this is? The lower window doesn't stay up, and the upper window drops as soon as I release the lock. They are tilt windows, the shot with the code is from the good window and the shot of the upper spring disconnected is from the broken one. I can be reached ... (cont.)

I need to replace many of our old window cranks, they have a stamp number on the bottom that is 45054. Do you have replacement handles and covers that would fit this?

I have vinyl glider windows wit two sets of brass roller for each window. The rollers have worn down. I have attached the dimensions. The nylon housings appear to be in good shape the rollers are 9/16 with a 3/8 pin

I am trying to identify which pivot shoe will work best / is closest to this product. Thank you.

I have a Milgard channel balancer that the rope snapped. The numbers on the balancer are 23 4 JV CMC 7. Can someone advise on which replacement channel balancer I need? Thanks in advance!

Could you help with finding this style of window stop?Thank youBrian

Please help findig these parts

My existing window spiral balance non tilt: 3/8" diameter yellow tip 28" sash Weight 18 lb. Which one should I buy to replace

These windows are peachtree windows, double hung, tilt, wooden with aluminum clad exterior. I have 4 different size windows but not all of them are broken.

need to replace the balancing on this window, looking for pricing for the balance assembly for Upper and Lower

I need to replace a broken connector for an Independent Mirror Industries bifold mirror door of unknown age. I contacted SWISCO by phone earlier today and was advised to send an image of the part. One picture above is of the broken connector and the second picture is of the intact connector on the ... (cont.)

1540 @ 16" 2730 @ 28" 140" of the spine or whatever it is called.

Dual coil balance with a 9 stamped on both coils. 2 screws mount it to the window frame, one through each coil

House built in 1988 Solid wood sashes Milled aluminum channel section: J 24HDB 26 inches long 1/2 inch wide Five eights inch deep Quantity 2 (two) needed (one left, one right if applicable)

Not really sure how this even goes together. Never seen one like this before. Its at my Aunts house.

I need the tool used to pry open the channel where weather stripping got cinched in

The part number I ordered is 82-108 mounting plate. That works well. But I have two other issues. One is I need one small screw, which I will order. I also need a schematic for reassembly. I must be doing something out of order, because the two smaller screws with white-painted head (the screw I n ... (cont.)

This a half inch double balance coil removed from an alside window(no markings)I believe i read a 5K on outer coil & a 6K on the inner coil

Hurd window operators (30 years old) - appears plastic "figure 8" slide pieces are brittle/broken. Need new operators, not sure what model. 6D92P is stamped on the lower arm. 07900 is stamped on the upper arm. need 4 right, 2 left pix attached. thx!

Snapped and we need to replace