Viewing all customer Discussions for:

Other

need to replace the balancing on this window, looking for pricing for the balance assembly for Upper and Lower

I need to replace a broken connector for an Independent Mirror Industries bifold mirror door of unknown age. I contacted SWISCO by phone earlier today and was advised to send an image of the part. One picture above is of the broken connector and the second picture is of the intact connector on the ... (cont.)

1540 @ 16" 2730 @ 28" 140" of the spine or whatever it is called.

Dual coil balance with a 9 stamped on both coils. 2 screws mount it to the window frame, one through each coil

House built in 1988 Solid wood sashes Milled aluminum channel section: J 24HDB 26 inches long 1/2 inch wide Five eights inch deep Quantity 2 (two) needed (one left, one right if applicable)

Not really sure how this even goes together. Never seen one like this before. Its at my Aunts house.

I need the tool used to pry open the channel where weather stripping got cinched in

The part number I ordered is 82-108 mounting plate. That works well. But I have two other issues. One is I need one small screw, which I will order. I also need a schematic for reassembly. I must be doing something out of order, because the two smaller screws with white-painted head (the screw I n ... (cont.)

This a half inch double balance coil removed from an alside window(no markings)I believe i read a 5K on outer coil & a 6K on the inner coil

Hurd window operators (30 years old) - appears plastic "figure 8" slide pieces are brittle/broken. Need new operators, not sure what model. 6D92P is stamped on the lower arm. 07900 is stamped on the upper arm. need 4 right, 2 left pix attached. thx!

Snapped and we need to replace

Good Morning, I need 2 27" window balance replacements and the stamp on each is 26-4. Thank you so much!

Hello I have I attached a few photos of the parts I need can you tell me if you have those

please review the example of what i'm seeking for below.

Hello, I recently purchased a 82-086 - Legacy Keyed Handle Set from you. The handle set fits the door and works with the lock, but I have 2 problems with the product. Problem 1) They key will not come out of the lock. I've tested in both the locked and unlocked position, but the key will not come ou ... (cont.)

Door handle broken. Sold by Harvey. Manufactured by gherkin. I believe Harvey installed their own hardware.

Cavco awning windows and were installed in 97. I need 3 replacement handles.

Hello, I need help identifying this balance. Thank you.

I am working with a client to replace 3 window left operators. All are truth, see picture, and all of the three have failed in the same way. Let me know if any additional details are need so I can order replacements. Thank you Tom

Good afternoon, I'm looking for those pieces from my window to be replace. I really appreciate your help. Looking forward to hearing from you. Thank you